SVT svt_mem Class Member List

This is the complete list of members for class svt_mem, including all inherited members.


ovm_transaction	function void	accept_tr ( time accept_time = 0 )





svt_mem	bit [SVT_MEM_MAX_ADDR_REGION_WIDTH-1:0]	addr_region = 0;	Identifies the address region in which this memory resides.


svt_mem	enum value	ADDRESS

svt_mem	typedef	addr_t

svt_sequence_item_base	function void	add_compound_pattern_prop ( svt_pattern pttrn, string owner, string name, svt_pattern_data :: type_enum typ, int unsigned supported_methods_flag = 0, int unsigned field_width = 0, string enum_type = "" )	Method which can be used to add a single svt_compound_pattern_data element to the provided pattern.

svt_sequence_item_base	function void	add_pattern_prop ( svt_pattern pttrn, string owner, string name, svt_pattern_data :: type_enum typ, int unsigned supported_methods_flag = 0, int unsigned field_width = 0, string enum_type = "" )	Method which can be used to add a single svt_pattern_data element to the provided pattern.

svt_sequence_item_base	function svt_pattern	allocate_auto_op_pattern ( int allocate_pattern_filter )	This method allocates a pattern containing svt_pattern_data instances for all of the data fields in the object that support automated implementations for the common data methods.

svt_sequence_item_base	function svt_pattern	allocate_pattern ( )	This is a pattern allocation method which is implemented to add properties without including support for the 'automated operation' capabilities. This is provided by VIPs which have not updated to provide the automated operation support via do_allocate_pattern. VIPs should provide one or the other, but not both.


svt_sequence_item_base	function svt_pattern	allocate_xml_pattern ( )	This method allocates a pattern containing svt_pattern_data instances for all of the data fields in the object that are to be included in the object's XML output.


svt_sequence_item_base	function bit	auto_compare ( svt_sequence_item_base rhs_data, ovm_comparer comparer )	Methodology independent 'compare' method for comparing fields based on pattern information.

svt_sequence_item_base	function void	auto_copy ( svt_sequence_item_base rhs_data )	Methodology independent 'copy' method for copying fields based on pattern information.

svt_sequence_item_base	function void	auto_pack ( ovm_packer packer )	Methodology independent 'pack' method for packing fields based on pattern information.

svt_sequence_item_base	function void	auto_unpack ( ovm_packer packer )	Methodology independent 'unpack' method for unpacking fields based on pattern information.

ovm_transaction	function integer	begin_child_tr ( time begin_time = 0, integer parent_handle = 0 )


ovm_transaction	function integer	begin_tr ( time begin_time = 0 )

ovm_sequence_item	virtual task	body ( )

svt_sequence_item_base	static function timeunit_enum	calc_timeunit ( )	Calculates the timeunit that the VIP has been compiled in.




svt_mem	function void	clear ( )	Clears contents of the memory.

ovm_object	function ovm_object	clone ( )







ovm_object	function bit	compare ( ovm_object rhs, ovm_comparer comparer = null )

svt_sequence_item_base	function bit	compare_pattern_data ( svt_pattern_data rhs_pd, ovm_comparer comparer, string name_override = "" )	Compare the information associated with a single pattern_data instance.

svt_sequence_item_base	function bit	compare_via_pattern ( svt_pattern pttrn )	This method takes advantage of the get_prop_val method to make a simple way to compare a property pattern with the contents of a data instance. The method simply uses each name specified in pttrn, uses get_prop_val to retrieve the corresponding value from the data instance, and compares it to the value stored in the pattern.

svt_sequence_item_base	enum value	COMPLETE

svt_sequence_item_base	static ovm_comparer	complete_comparer = null;	This static `SVT_XVM(comparer) can be used to request a COMPLETE compare. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.

svt_sequence_item_base	static ovm_packer	complete_packer = null;	This static `SVT_XVM(packer) can be used to request a COMPLETE pack. This is a shared packer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.

ovm_object	function string	convert2string ( )

ovm_object	function void	copy ( ovm_object rhs )


svt_mem	typedef	data_t

svt_mem	int	data_wdth = 0;	Stores the effective data width, as defined by the configuration.

svt_sequence_item_base	function bit	decode_pattern_data ( svt_pattern_data pd, ref string pd_string, input string delimiter )	Simple utility used to convert an svt_pattern_data representation into its equivalent string property value representation.

svt_sequence_item_base	function bit	decode_prop_val ( string prop_name, bit [1023:0] prop_val, ref string prop_val_string, input svt_pattern_data :: type_enum typ )	Simple utility used to convert 'bit [1023:0]' property value representation into its equivalent string property value representation. If provided the type is used by the default implementation to choose an appropriate conversion method. If the type is specified as UNDEF then the the field is assumed to be an int field and the string is assumed to be an ascii int representation. Derived classes can extend this method to support other field representations such as strings, enums, bitvecs, etc.

svt_mem	enum value	DECR

svt_sequence_item_base	enum value	DEEP

ovm_transaction	function void	disable_recording ( )

svt_sequence_item_base	function void	display_get_prop_val_outcome ( bit success, string prop_name, bit [1023:0] prop_val, int array_ix, svt_sequence_item_base data_obj )	Method to display the outcome of a get_prop_val operation.

svt_sequence_item_base	static int	display_kind = -1;	Used by all svt_sequence_item_base derived display methods to limit the contents of the string generated by the 'psdisplay' method and put to the log by the 'display' method.

svt_sequence_item_base	function void	display_set_prop_val_outcome ( bit success, string prop_name, bit [1023:0] prop_val, int array_ix )	Method to display the outcome of a set_prop_val operation.


ovm_transaction	protected function void	do_accept_tr ( )

svt_mem	function svt_pattern	do_allocate_pattern ( )	Added t support the svt_shorthand_psdisplay_method

ovm_transaction	protected function void	do_begin_tr ( )

svt_mem	function bit	do_compare ( ovm_object rhs, ovm_comparer comparer )	Extend the compare routine to compare the memory contents


svt_mem	function void	do_copy ( ovm_object rhs )	Extend the copy routine to compare the memory contents

ovm_transaction	protected function void	do_end_tr ( )

svt_sequence_item_base	function bit	do_is_valid ( bit silent = 1, int kind = -1 )	Checks to see that the data field values are valid.

svt_sequence_item_base	function void	do_pack ( ovm_packer packer )	Override the 'do_pack' method to pack fields directly.


svt_mem	function void	do_print ( ovm_printer printer )	Extend the display routine to display the memory contents

svt_sequence_item_base	function void	do_record ( ovm_recorder recorder )	Override the 'do_record' method to record fields directly.

ovm_object	function string	do_sprint ( ovm_printer printer )

svt_sequence_item_base	function void	do_unpack ( ovm_packer packer )	Override the 'do_unpack' method to unpack fields directly.


ovm_transaction	function void	enable_recording ( string stream )

svt_sequence_item_base	function bit	encode_prop_val ( string prop_name, string prop_val_string, ref bit [1023:0] prop_val, input svt_pattern_data :: type_enum typ )	Simple utility used to convert string property value representation into its equivalent 'bit [1023:0]' property value representation. If provided the type is used by the default implementation to choose an appropriate conversion method. If the type is specified as UNDEF then the the field is assumed to be an int field and the string is assumed to be an ascii int representation. Derived classes can extend this method to support other field representations such as strings, enums, bitvecs, etc.


ovm_transaction	function void	end_tr ( time end_time = 0, bit free_handle = 1 )

ovm_transaction	ovm_object_string_pool	events = new;

svt_sequence_item_base	function type_enum	find_type ( string prop_name )	Utility method which can be used to get the 'type' of the indicated property.

ovm_sequence_item	virtual task	finish_item ( ovm_sequence_item item, int set_priority = -1 )

ovm_transaction	function time	get_accept_time ( )

svt_mem	function bit	get_aligned_addr ( ref bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] addr )	Gets the aligned address.

ovm_transaction	function time	get_begin_time ( )

svt_sequence_item_base	function string	get_class_name ( )	Returns the name of this class, or a class derived from this class.





ovm_sequence_item	function int	get_depth ( )

svt_sequence_item_base	function bit	get_do_compare_done ( )	Utility to obtain the do_compare_done setting for the object.

svt_sequence_item_base	function bit	get_do_pack_done ( )	Utility to obtain the do_pack_done setting for the object.

ovm_transaction	function time	get_end_time ( )

svt_sequence_item_base	static function string	get_environment_variable_value ( string method_name, string env_var_name, ovm_report_object reporter, bit is_optional = 0 )	Function which can be used to get access to an environment variable.

ovm_transaction	function ovm_event_pool	get_event_pool ( )

ovm_sequence_item	function string	get_full_name ( )

ovm_transaction	function ovm_component	get_initiator ( )

ovm_object	static function int	get_inst_count ( )

ovm_object	function int	get_inst_id ( )

svt_mem	function string	get_mcd_class_name ( )	Returns the class name for the object.

ovm_object	function string	get_name ( )


svt_sequence_item_base	function svt_pa_object_data	get_pa_obj_data ( string uid = "", string typ = "", string parent_uid = "", string channel = "" )	This method returns PA object which contains the PA header information for XML or FSDB.

ovm_sequence_item	function ovm_sequence_base	get_parent_seq ( )

ovm_sequence_item	function ovm_sequence_base	get_parent_sequence ( )

svt_mem	function bit	get_prop_val ( string prop_name, ref bit [1023:0] prop_val, input int array_ix, ref svt_sequence_item_base data_obj )	Added to support the svt_shorthand_psdisplay method

svt_mem	function bit	get_property ( string name, output bit [1023:0] value )	Obtains a property value from this memory

svt_sequence_item_base	function bit	get_prop_val_via_pattern ( ref svt_pattern pttrn )	This method takes advantage of the get_prop_val method to make a simple way to extract a property pattern from a data instance. The method simply takes all of the names specified in pttrn, and uses get_prop_val to retrieve the corresponding value so it can be placed in the pattern.

ovm_sequence_item	function ovm_sequence_base	get_root_sequence ( )

ovm_sequence_item	function string	get_root_sequence_name ( )

ovm_sequence_item	function int	get_sequence_id ( )

ovm_sequence_item	function ovm_sequencer_base	get_sequencer ( )

ovm_sequence_item	function string	get_sequence_path ( )

svt_sequence_item_base	function string	get_suite_name ( )	Returns the suite name associated with an object.


svt_sequence_item_base	static function string	get_timeunit_str ( string class_name, ovm_report_object reporter )	Returns the timeunit that the VIP has been compiled in as a string value.

ovm_transaction	function integer	get_tr_handle ( )

ovm_transaction	function integer	get_transaction_id ( )



svt_sequence_item_base	function string	get_uid ( )	This method can be used to obtain a unique identifier for a data object.

svt_sequence_item_base	function svt_pattern	get_user_fsdb_props ( )	User method for providing additional properties, consisting of name/value pairs, that are to be included in any FSDB output.

ovm_sequence_item	function bit	get_use_sequence_info ( )

svt_sequence_item_base	function string	get_xml_object_block_desc ( string obj_type = "", string obj_sub_type = "", string parent_uid = "", string channel = "" )	This method returns a string for use in the XML object block which provides basic information about the object.

svt_mem	enum value	INCR


ovm_object	static function ovm_status_container	init_status ( )

ovm_transaction	function bit	is_active ( )

svt_mem	function bit	is_in_bounds ( bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] addr )	Used to check whether a given byte-level address is within the Min/Max bounds for this memory.

svt_mem	function bit	is_locked ( bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] addr )	Used to check whether a given byte-level address within this memory is locked or not locked.

ovm_transaction	function bit	is_recording_enabled ( )

svt_sequence_item_base	function bit	is_safe_as_ref ( svt_xml_writer writer )	This method indicates whether it will be safe to reference this object in the output generated by the writer.

svt_sequence_item_base	function bit	is_silent ( )	Returns true if silent mode is currently enabled

svt_sequence_item_base	function bit	is_valid ( bit silent = 1, int kind = -1 )	Checks to see that the data field values are valid.

ovm_sequence_item	static bit	issued1 = 0;

ovm_sequence_item	static bit	issued2 = 0;

ovm_sequence_item	virtual function bit	is_item ( )

svt_sequence_item_base	int	kind = svt_sequence_item_base::UNASSIGNED;	Used as an alternate method for the 'kind' argument to compare, is_valid, byte_size, byte_pack, and byte_unpack. If set to a value other than 10, then this value will be used rather than the 'kind' value that is passed into these methods or the policy class that is passed in. Acceptible values are RELEVANT and COMPLETE.

svt_sequence_item_base	enum	kind_enum	Kinds commonly recognized (i.e., via constants) by compare, is_valid, byte_size, byte_pack, and byte_unpack. Although specified as an enum, the constant values associated with these enum elements allow them to be used to define the integer 'kind' parameter to these methods.

svt_sequence_item_base	typedef	kind_enum

svt_sequence_item_base	function bit	load ( int file )

svt_sequence_item_base	function bit	load_from_string ( string text )

svt_mem	function bit	load_mem ( string filename, bit is_pattern = 0, int data_wdth = -1, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] start_addr = 0, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] end_addr = 1 << 64 - 1 )	Loads the contents of the file into memory. Data should be in $readmemh format.

svt_sequence_item_base	function bit	load_prop_vals ( string filename = "", int file = 0 )	This method loads the property values from the indicated file assuming a basic text format. If filename specified without file then creates file handle and uses it to load the values. If file specified without filename then uses file to load the values. If both filename and file specified than no load is attempted and the failure is indicated via the return.

svt_sequence_item_base	function bit	load_prop_vals_with_checks ( string filename = "", int file = 0 )	This method calls load_prop_vals, but enables checking on the file format and content.


svt_sequence_item_base	function int	log_base_2 ( int val, bit round_up = 1 )	This method returns the log_base_2 of provided value.


svt_mem	bit [SVT_MEM_MAX_ADDR_WIDTH-1:0]	max_addr = 0;	Identifies maximum byte-level address considered part of this memory.

svt_sequence_item_base	static int	max_array_elem_display = SVT_MAX_ARRAY_ELEM_DISPLAY_DEFAULT;	Used by all svt_data derived display methods to limit the number of array entries which are displayed whenever an array data member is displayed. If the number of array elements is less than or equal to the max_array_elem_display value or max_array_elem_display is set to -1, then all array elements are displayed. If max_array_elem_display is set to 0, then only the array size will be displayed. Otherwise max_array_elem_display array elements are displayed. Since this field is not owned by an individual instance, it is not copied, compared, etc., like the other svt_data properties. Initial value set to SVT_MAX_ARRAY_ELEM_DISPLAY_DEFAULT so it can be overridden at compile time.

svt_sequence_item_base	function void	mcd_log_object ( int mcd_log_file, string mcd_parameter )

svt_mem	svt_mem :: meminit_enum	meminit	Determines the form of data that is returned by a read from an address that has not previously been written.

svt_mem	bit [SVT_MEM_MAX_ADDR_WIDTH-1:0]	meminit_address_offset	The offset to be added to the address, the sum of which defines the data returned by read from a location not previously written, if (and only if) meminit = ADDR.

svt_mem	enum	meminit_enum	Defines values used to specify what type of data is returned when a read targets a memory address that has not been initialized (not previously written).

svt_mem	typedef	meminit_enum

svt_mem	bit [SVT_MEM_MAX_DATA_WIDTH-1:0]	meminit_value	Value used to calculate default data returned by read from a location not previously written, if meminit is VALUE, INCR or DECR. If meminit = VALUE, this represents the default value returned; if meminit = INCR or if meminit = DECR, this represents the default value at the minimum byte-level address of this memory. Default value of other locations will be calculated based on this value.


svt_mem	bit [SVT_MEM_MAX_ADDR_WIDTH-1:0]	min_addr = 0;	Identifies minimum byte-level address considered part of this memory.

ovm_transaction	protected function integer	m_begin_tr ( time begin_time = 0, integer parent_handle = 0, bit has_parent = 0 )

ovm_object	static protected function void	m_delete_field_array ( )

ovm_sequence_item	protected int	m_depth = -1;

ovm_object	protected function int	m_do_data ( string arg, inout ovm_bitstream_t lhs, input ovm_bitstream_t rhs, int what, int bits, int flag )

ovm_object	protected function int	m_do_data_object ( string arg, inout ovm_object lhs, input ovm_object rhs, int what, int flag )

ovm_object	protected function int	m_do_data_real ( string arg, inout real lhs, input real rhs, int what, int flag )

ovm_object	protected function int	m_do_data_string ( string arg, inout string lhs, input string rhs, int what, int flag )

ovm_object	protected function void	m_do_field_check ( string field )

ovm_object	protected function int	m_do_set ( string match, string arg, inout ovm_bitstream_t lhs, input int what, int flag )

ovm_object	protected function int	m_do_set_object ( string match, string arg, inout ovm_object lhsobj, input int what, int flag )

ovm_object	protected function int	m_do_set_string ( string match, string arg, inout string lhs, input int what, int flag )


ovm_object	static protected int	m_field_array [string]


ovm_sequence_item	virtual task	m_finish_item ( ovm_sequencer_base sequencer_ptr, ovm_sequence_item sequence_ptr, int set_priority = -1 )

ovm_object	protected function string	m_get_function_type ( int what )

ovm_object	protected virtual function ovm_report_object	m_get_report_object ( )

ovm_object	static function ovm_status_container	m_get_status ( )

ovm_object	static protected int	m_inst_count = 0;




ovm_sequence_item	protected ovm_sequence_base	m_parent_sequence = null;

ovm_object	protected function void	m_record_field_object ( string arg, ovm_object value, ovm_recorder recorder = null, int flag = OVM_DEFAULT )

ovm_object	static protected ovm_status_container	m_sc = init_status;


ovm_sequence_item	protected ovm_sequencer_base	m_sequencer = null;

ovm_sequence_item	virtual function void	m_set_p_sequencer ( )



ovm_sequence_item	protected bit	m_use_sequence_info = 0;

ovm_sequence_item	virtual function void	mid_do ( ovm_sequence_item this_item )

ovm_sequence_item	virtual task	m_start_item ( ovm_sequencer_base sequencer_ptr, ovm_sequence_item sequence_ptr, int set_priority )


svt_mem	function void	new ( string name = "svt_mem_inst", string suite_name = "", int data_wdth = 32, int addr_region = 0, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] min_addr = 0, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] max_addr = 1 << 64 - 1 )	CONSTRUCTOR: Create a new instance of this class.

svt_sequence_item_base	enum value	NULL

svt_mem	enum value	ONES


ovm_object	function int	pack ( ref bit bitstream[], input ovm_packer packer )

ovm_object	function int	pack_bytes ( ref byte unsigned bytestream[], input ovm_packer packer )

ovm_object	function int	pack_ints ( ref int unsigned intstream[], input ovm_packer packer )

svt_sequence_item_base	function void	pack_pattern_data ( svt_pattern_data pd, ovm_packer packer )	Pack the information associated with a single pattern_data instance.

ovm_sequence_item	virtual function void	post_do ( ovm_sequence_item this_item )

svt_sequence_item_base	function int	power_of_2 ( int val )	This method returns the power of 2 of provided value.

ovm_sequence_item	virtual task	pre_do ( bit is_item )

ovm_object	function void	print ( ovm_printer printer = null )

ovm_object	static function void	print_field_match ( string fnc, string match )

ovm_object	static bit	print_matches = 0;

svt_sequence_item_base	function void	print_pattern_data ( svt_pattern_data pd, ovm_printer printer, input string name_override )	Print the information associated with a single pattern_data instance.

ovm_sequence_item	bit	print_sequence_info = 0;



svt_mem	enum value	RANDOM

svt_mem	function logic [SVT_MEM_MAX_DATA_WIDTH-1:0]	read ( bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] addr, int set_lock = -1 )	Returns the value of the data word stored by this object.

svt_sequence_item_base	function int	reasonable_constraint_mode ( bit on_off )	Method to turn reasonable constraints on/off as a block. This method is not implemented in this virtual class.

ovm_object	function void	record ( ovm_recorder recorder = null )


svt_sequence_item_base	function void	record_pattern_data ( svt_pattern_data pd, ovm_recorder recorder, input string name_override )	Record the information associated with a single pattern_data instance.

svt_sequence_item_base	enum	recursive_op_enum	Hierachical transaction options. These are used to control how embedded objects are handled for the 'copy' and 'compare' methods.

svt_sequence_item_base	typedef	recursive_op_enum

svt_sequence_item_base	enum value	RELEVANT

svt_sequence_item_base	static ovm_comparer	relevant_comparer = null;	This static `SVT_XVM(comparer) can be used to request a RELEVANT compare. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.

svt_sequence_item_base	static ovm_packer	relevant_packer = null;	This static `SVT_XVM(packer) can be used to request a RELEVANT pack. This is a shared packer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.


ovm_object	function void	reseed ( )

svt_sequence_item_base	function int	resolve_compare_kind ( int kind, ovm_comparer comparer )	Resolves the kind value used for compare operations.

svt_sequence_item_base	function int	resolve_is_valid_kind ( int kind )	Resolves the kind value used for is_valid operations.

svt_sequence_item_base	function int	resolve_pack_kind ( int kind, ovm_packer packer )	Resolves the kind value used for pack/unpack operations.

svt_sequence_item_base	function real	safe_atoreal ( string ascii_real )	Utility method which can be used to safely convert an ascii string to a real value, dealing with any embedded '_' characters.

svt_sequence_item_base	function void	save ( int file )

svt_sequence_item_base	function bit	save_child_refs ( svt_xml_writer writer, string prefix = "" )	This method can be used to write out Unique IDs for the children of this object using the XML format. The extended class must drive this process, but can use the save_ref method on the to individual children to output those children.

svt_mem	function bit	save_mem ( string filename, int data_wdth = -1, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] start_addr = 0, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] end_addr = 1 << 64 - 1, bit enable_autosize_of_saveddata = 0 )	Dumps the contents of this memory into a file. The data is dumped in hex format.

svt_sequence_item_base	function bit	save_object_begin ( svt_xml_writer writer )	This method uses the 'writer' class methods to write out the object begin data to file. This method is intoduced to resolve the Verdi call back issue where during concurrent transaction the order of the transaction has to be correct otherwise Verdi dumper APIs will have performance issue.

svt_sequence_item_base	function bit	save_object_data ( svt_xml_writer writer, string prefix = "" )	This method writes the object start to XML/FSDB file, This method is introduced to resolve the Verdi call back issue where during concurrent transaction the order of the transaction as to be correct otherwise Verdi dumper APIs will have performance issue.

svt_sequence_item_base	function bit	save_pattern_to_xml ( svt_xml_writer writer, svt_pa_object_data pa_obj_data, svt_pattern pttrn, string prefix = "" )	This method writes the property values stored in the pattern to the indicated file using the XML format.

svt_sequence_item_base	function bit	save_prop_vals ( string filename = "", int file = 0, string prefix = "" )	This method saves the property values to the indicated file using a basic text format. If filename specified without file then creates file handle and uses it to saves the values. If file specified without filename then uses file to save the values. If both filename and file specified than no save is attempted and the failure is indicated via the return.

svt_sequence_item_base	function bit	save_prop_vals_to_fsdb ( string inst_name, string parent_object_uid = "", string stream_attr_namestream_attr_name = [$], string stream_attr_valstream_attr_val = [$] )	This method writes the property values associated with this data object to an FSDB file.


svt_sequence_item_base	function bit	save_prop_vals_to_fsdb_internal ( string top_level_name, string object_channel, string parent_object_uid = "", string object_uid = "", string prefix = "" )	This is an internal method and should not be used by external components.




svt_sequence_item_base	function bit	save_prop_vals_to_xml ( svt_xml_writer writer, string object_block_desc = "", string prefix = "" )	This method writes the property values to the indicated file using the XML format. This method relies on the allocate_xml_pattern method to obtain the pattern for the property values to be saved. Therefore the preferred mechanism for altering the format is to overload the allocate_xml_pattern to define a different pattern.

svt_sequence_item_base	function bit	save_ref ( svt_xml_writer writer, string prefix = "" )	This method can be used to write out the Unique IDs for an object using the XML format.

ovm_sequence_item	virtual function void	send_request ( ovm_sequence_item request, bit rerandomize = 0 )



ovm_sequence_item	function void	set_depth ( int value )

ovm_sequence_item	function void	set_id_info ( ovm_sequence_item item )

ovm_transaction	function void	set_initiator ( ovm_component initiator )

svt_sequence_item_base	function void	set_int_local ( string field_name, ovm_bitstream_t value, bit recurse = 1 )	Override the 'set_int_local' method to simply set the field via set_prop_val.

svt_mem	task	set_meminit ( svt_mem :: meminit_enum meminit = UNKNOWNS, bit [SVT_MEM_MAX_DATA_WIDTH-1:0] meminit_value = 0, bit [SVT_MEM_MAX_ADDR_WIDTH-1:0] meminit_address_offset = 0 )	Configures how the memory structures data to be returned by reads from uninitialized addresses.

ovm_object	function void	set_name ( string name )

ovm_object	function void	set_object_local ( string field_name, ovm_object value, bit clone = 1, bit recurse = 1 )

ovm_sequence_item	function void	set_parent_seq ( ovm_sequence_base parent )

ovm_sequence_item	function void	set_parent_sequence ( ovm_sequence_base parent )

svt_mem	function void	set_property ( string name, bit [1023:0] value )	Applies a property value to this memory

svt_sequence_item_base	function bit	set_prop_object ( string prop_name, svt_sequence_item_base prop_obj, int array_ix )	This method allows clients to assign an object to a single named property supported by a class derived from this class. This base class implementation always returns a value of '0' since the svt_sequence_item_base class has no 'object' properties.

svt_sequence_item_base	function bit	set_prop_val ( string prop_name, bit [1023:0] prop_val, int array_ix )	This method sets the value of a single named property. This method cannot be used to set the value of a sub-object.

svt_sequence_item_base	function bit	set_prop_val_via_pattern ( svt_pattern pttrn )	This method takes advantage of the set_prop_val method to make a simple way to take a common property pattern, and apply it across multiple data instances. The method simply takes all of the name/value pairs specified in pttrn, and uses set_prop_val to apply them to the data instance.

svt_sequence_item_base	function void	set_prop_val_via_plusargs ( string plusarg_keyword )	This method takes advantage of the set_prop_val method to load up a set of property values based on a command line plusarg value.

ovm_sequence_item	function void	set_sequence_id ( int id )

ovm_sequence_item	function void	set_sequencer ( ovm_sequencer_base sequencer )

svt_sequence_item_base	function void	set_string_local ( string field_name, string value, bit recurse = 1 )	Override the 'set_string_local' method to simply set the field via set_prop_val.


ovm_transaction	function void	set_transaction_id ( integer id )

ovm_sequence_item	function void	set_use_sequence_info ( bit value )

svt_sequence_item_base	enum value	SHALLOW

svt_sequence_item_base	static ovm_comparer	silent_complete_comparer = null;	This static `SVT_XVM(comparer) can be used to request a COMPLETE compare and to hide the messages generated due to comparison failures. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.

svt_sequence_item_base	function void	silent_mode ( bit mode )	Disables generation of internal messages. This can be used to turn off debug messages while executing a method that may itself be used as an argument to VMM message macros. Using this feature resolves the issue of embedded messages.


svt_sequence_item_base	static ovm_comparer	silent_relevant_comparer = null;	This static `SVT_XVM(comparer) can be used to request a RELEVANT compare and to hide the messages generated due to comparison failures. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care.

ovm_object	function string	sprint ( ovm_printer printer = null )

ovm_sequence_item	virtual task	start_item ( ovm_sequence_item item, int set_priority = -1 )


svt_sequence_item_base	static function bit	strip_array_element_suffix ( ovm_report_object reporter, string prop_name, output string base_name, output int array_ix )	Utility method which accepts a property name containing an array element index, and returns the base property name and the index value.

svt_sequence_item_base	protected string	suite_name = "";	Identifies the product suite with which a derivative class is associated. Can be accessed through 'get_suite_name', but cannot be altered after object creation.





svt_sequence_item_base	enum value	UNASSIGNED


svt_mem	enum value	UNKNOWNS

ovm_object	function int	unpack ( ref bit bitstream[], input ovm_packer packer )

ovm_object	function int	unpack_bytes ( ref byte unsigned bytestream[], input ovm_packer packer )

ovm_object	function int	unpack_ints ( ref int unsigned intstream[], input ovm_packer packer )

svt_sequence_item_base	function void	unpack_pattern_data ( svt_pattern_data pd, ovm_packer packer )	Unpack the information associated with a single pattern_data instance.

svt_mem	bit [SVT_MEM_MAX_DATA_WIDTH-1:0]	user_pattern [$]	Queue used to store a user-defined pattern

svt_mem	enum value	USER_PATTERN

ovm_object	static bit	use_ovm_seeding = 1;

svt_mem	enum value	VALUE

ovm_sequence_item	virtual task	wait_for_grant ( int item_priority = -1, bit lock_request = 0 )

ovm_sequence_item	virtual task	wait_for_item_done ( int transaction_id = -1 )

svt_mem	function bit	write ( bit [(SVT_MEM_MAX_ADDR_WIDTH-1):0] addr = 0, bit [(SVT_MEM_MAX_DATA_WIDTH-1):0] data = 0, bit [(SVT_MEM_MAX_DATA_WIDTH/8-1):0] byteen = ~0, int set_lock = -1 )	Stores a data word into this object, with optional byte-enables.

svt_mem	enum value	ZEROES