This is the complete list of members for class svt_svc_err_check_stats, including all inherited members.
| uvm_transaction | function void | accept_tr ( time accept_time = 0 ) | |
| svt_sequence_item_base | function void | add_compound_pattern_prop ( svt_pattern pttrn, string owner, string name, svt_pattern_data :: type_enum typ, int unsigned supported_methods_flag = 0, int unsigned field_width = 0, string enum_type = "" ) | Method which can be used to add a single svt_compound_pattern_data element to the provided pattern. |
| svt_err_check_stats | function void | add_cov ( bit enable_pass_cov = 0, bit enable_fail_cov = 1 ) | Method which establishes the err_check_stats_cov_inst. This object is created using the create_cov method. |
| svt_sequence_item_base | function void | add_pattern_prop ( svt_pattern pttrn, string owner, string name, svt_pattern_data :: type_enum typ, int unsigned supported_methods_flag = 0, int unsigned field_width = 0, string enum_type = "" ) | Method which can be used to add a single svt_pattern_data element to the provided pattern. |
| svt_sequence_item_base | function svt_pattern | allocate_auto_op_pattern ( int allocate_pattern_filter ) | This method allocates a pattern containing svt_pattern_data instances for all of the data fields in the object that support automated implementations for the common data methods. |
| svt_sequence_item_base | function svt_pattern | allocate_pattern ( ) | This is a pattern allocation method which is implemented to add properties without including support for the 'automated operation' capabilities. This is provided by VIPs which have not updated to provide the automated operation support via do_allocate_pattern. VIPs should provide one or the other, but not both. |
| svt_sequence_item_base | function svt_pattern | allocate_xml_pattern ( ) | This method allocates a pattern containing svt_pattern_data instances for all of the data fields in the object that are to be included in the object's XML output. |
| svt_sequence_item_base | function bit | auto_compare ( svt_sequence_item_base rhs_data, uvm_comparer comparer ) | Methodology independent 'compare' method for comparing fields based on pattern information. |
| svt_sequence_item_base | function void | auto_copy ( svt_sequence_item_base rhs_data ) | Methodology independent 'copy' method for copying fields based on pattern information. |
| svt_sequence_item_base | function void | auto_pack ( uvm_packer packer ) | Methodology independent 'pack' method for packing fields based on pattern information. |
| svt_sequence_item_base | function void | auto_unpack ( uvm_packer packer ) | Methodology independent 'unpack' method for unpacking fields based on pattern information. |
| uvm_transaction | function integer | begin_child_tr ( time begin_time = 0, integer parent_handle = 0 ) | |
| uvm_transaction | uvm_event | begin_event | |
| uvm_transaction | function integer | begin_tr ( time begin_time = 0 ) | |
| svt_sequence_item_base | static function timeunit_enum | calc_timeunit ( ) | Calculates the timeunit that the VIP has been compiled in. |
| svt_err_check_stats | function void | capture_is_enabled ( ) | Captures whether the check is enabled (1) or disabled (0). |
| svt_err_check_stats | protected string | check_id_str = ""; | An ID string that identifies a unique error check. Currently supporting check_id or check_id_str. |
| uvm_object | function uvm_object | clone ( ) | |
| uvm_object | function bit | compare ( uvm_object rhs, uvm_comparer comparer = null ) | |
| svt_sequence_item_base | function bit | compare_pattern_data ( svt_pattern_data rhs_pd, uvm_comparer comparer, string name_override = "" ) | Compare the information associated with a single pattern_data instance. |
| svt_sequence_item_base | function bit | compare_via_pattern ( svt_pattern pttrn ) | This method takes advantage of the get_prop_val method to make a simple way to compare a property pattern with the contents of a data instance. The method simply uses each name specified in pttrn, uses get_prop_val to retrieve the corresponding value from the data instance, and compares it to the value stored in the pattern. |
| svt_sequence_item_base | enum value | COMPLETE | |
| svt_sequence_item_base | static uvm_comparer | complete_comparer = null; | This static `SVT_XVM(comparer) can be used to request a COMPLETE compare. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| svt_sequence_item_base | static uvm_packer | complete_packer = null; | This static `SVT_XVM(packer) can be used to request a COMPLETE pack. This is a shared packer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| uvm_object | function string | convert2string ( ) | |
| uvm_object | function void | copy ( uvm_object rhs ) | |
| svt_err_check_stats | uvm_object_wrapper | cov_override = null; | |
| svt_err_check_stats | function svt_err_check_stats_cov | create_cov ( ) | Method which creates an svt_err_check_stats_cov instance for this svt_err_check_stats instance. The default implementation uses the'type' override facilities provided by the verification methodology. |
| svt_err_check_stats | enum value | DEBUG | |
| svt_sequence_item_base | function bit | decode_pattern_data ( svt_pattern_data pd, ref string pd_string, input string delimiter ) | Simple utility used to convert an svt_pattern_data representation into its equivalent string property value representation. |
| svt_err_check_stats | function bit | decode_prop_val ( string prop_name, bit [1023:0] prop_val, ref string prop_val_string, input svt_pattern_data :: type_enum typ ) | Simple utility used to convert 'bit [1023:0]' property value representation into its equivalent string property value representation. Extended to support decoding of enum values. |
| svt_sequence_item_base | enum value | DEEP | |
| svt_err_check_stats | enum value | DEFAULT | |
| svt_err_check_stats | svt_err_check_stats :: fail_effect_enum | default_fail_effect | Specifies the default handling of this check in the event of failure. A value of DEFAULT results in no message being generated. This value can be overridden by the code implementing the check when the check is fired. |
| svt_err_check_stats | svt_err_check_stats :: fail_effect_enum | default_pass_effect | Specifies the default handling of this check in the event of a pass. A value of DEFAULT results in no message being generated. This value can be overridden by the code implementing the check when the check is fired. |
| svt_err_check_stats | function void | delete_cov ( ) | Method which deletes the err_check_stats_cov_inst field, assigning it to 'null'. |
| svt_err_check_stats | protected string | description = SVT_DATA_UTIL_UNSPECIFIED; | A string that describes what is being checked. |
| uvm_transaction | function void | disable_recording ( ) | |
| svt_sequence_item_base | function void | display_get_prop_val_outcome ( bit success, string prop_name, bit [1023:0] prop_val, int array_ix, svt_sequence_item_base data_obj ) | Method to display the outcome of a get_prop_val operation. |
| svt_sequence_item_base | static int | display_kind = -1; | Used by all svt_sequence_item_base derived display methods to limit the contents of the string generated by the 'psdisplay' method and put to the log by the 'display' method. |
| svt_sequence_item_base | function void | display_set_prop_val_outcome ( bit success, string prop_name, bit [1023:0] prop_val, int array_ix ) | Method to display the outcome of a set_prop_val operation. |
| uvm_transaction | protected function void | do_accept_tr ( ) | |
| svt_err_check_stats | function svt_pattern | do_allocate_pattern ( ) | This method allocates a pattern containing svt_pattern_data instances for all of the primitive data fields in the object. The svt_pattern_data :: name is set to the corresponding field name, the svt_pattern_data :: value is set to 0. |
| uvm_transaction | protected function void | do_begin_tr ( ) | |
| svt_sequence_item_base | function bit | do_compare ( uvm_object rhs, uvm_comparer comparer ) | Override the 'do_compare' method to compare fields directly. |
| svt_sequence_item_base | function void | do_copy ( uvm_object rhs ) | Override the 'do_copy' method to copy fields directly. |
| uvm_transaction | protected function void | do_end_tr ( ) | |
| svt_sequence_item_base | function bit | do_is_valid ( bit silent = 1, int kind = -1 ) | Checks to see that the data field values are valid. |
| svt_sequence_item_base | function void | do_pack ( uvm_packer packer ) | Override the 'do_pack' method to pack fields directly. |
| svt_sequence_item_base | function void | do_print ( uvm_printer printer ) | Override the 'do_print' method to print fields directly. |
| svt_sequence_item_base | function void | do_record ( uvm_recorder recorder ) | Override the 'do_record' method to record fields directly. |
| svt_sequence_item_base | function void | do_unpack ( uvm_packer packer ) | Override the 'do_unpack' method to unpack fields directly. |
| uvm_transaction | function void | enable_recording ( string stream, uvm_recorder recorder = null ) | |
| svt_err_check_stats | function bit | encode_prop_val ( string prop_name, string prop_val_string, ref bit [1023:0] prop_val, input svt_pattern_data :: type_enum typ ) | Simple utility used to convert string property value representation into its equivalent 'bit [1023:0]' property value representation. Extended to support encoding of enum values. |
| uvm_transaction | uvm_event | end_event | |
| uvm_transaction | function void | end_tr ( time end_time = 0, bit free_handle = 1 ) | |
| svt_err_check_stats | protected string | err_check_name = ""; | An optional string which identifies the svt_err_check instance that contains this svt_err_check_stats instance. |
| svt_err_check_stats | svt_err_check_stats_cov | err_check_stats_cov_inst | Instance of the svt_err_check_stats_cov class corresponding to this svt_err_check_stats instance. |
| svt_err_check_stats | enum value | ERROR | |
| uvm_transaction | const uvm_object_string_pool | events = new; | |
| svt_err_check_stats | int | exec_count = 0; | Tracks the number of times that a given check has been executed. |
| svt_err_check_stats | enum value | EXPECTED | |
| svt_err_check_stats | int | fail_debug_count = 0; | Tracks the number of times the check has failed, with DEBUG effect. |
| svt_err_check_stats | enum | fail_effect_enum | Value that is associated with a check passing or failing, which is sed to specify the desired effect when that check passes or fails. |
| svt_err_check_stats | typedef | fail_effect_enum | |
| svt_err_check_stats | int | fail_err_count = 0; | Tracks the number of times the check has failed, with ERROR or FATAL effect. |
| svt_err_check_stats | int | fail_expected_count = 0; | Tracks the number of times the check has failed, with EXPECTED effect. |
| svt_err_check_stats | int | fail_ignore_count = 0; | Tracks the number of times the check has failed, with IGNORED effect. |
| svt_err_check_stats | int | fail_note_count = 0; | Tracks the number of times the check has failed, with NOTE effect. |
| svt_err_check_stats | int | fail_verbose_count = 0; | Tracks the number of times the check has failed, with VERBOSE effect. |
| svt_err_check_stats | int | fail_warn_count = 0; | Tracks the number of times the check has failed, with WARNING effect. |
| svt_err_check_stats | int | filter_after_count = 0; | Number of ERRORs after which the error will automatically be filtered. If this variable is set to '0', automatic filtering will be disabled. |
| svt_sequence_item_base | function type_enum | find_type ( string prop_name ) | Utility method which can be used to get the 'type' of the indicated property. |
| uvm_transaction | function time | get_accept_time ( ) | |
| svt_err_check_stats | function string | get_basic_check_info ( ) | Returns a formatted string that provides the basic information about the check: the description and the reference. |
| svt_err_check_stats | function string | get_basic_check_message ( string message = "" ) | Returns a string that provides the basic check message (basic check info plus message, if provided). |
| uvm_transaction | function time | get_begin_time ( ) | |
| svt_err_check_stats | function string | get_check_id_str ( ) | Returns the ID string of a check statistics object. |
| svt_err_check_stats | function string | get_check_info ( ) | Returns a formatted string that provides the general information about the check including suite, check identifier, group, sub-group, description, and reference. |
| svt_err_check_stats | function string | get_check_message ( string message = "" ) | Returns a string that provides the general check message (check info plus message, if provided). |
| svt_err_check_stats | function string | get_check_stats ( ) | Returns a formatted string that provides the statistics (counts) about the check. |
| uvm_sequence_item | function int | get_depth ( ) | |
| svt_err_check_stats | function string | get_description ( ) | Returns a string that provides only the check's description. |
| svt_sequence_item_base | function bit | get_do_compare_done ( ) | Utility to obtain the do_compare_done setting for the object. |
| svt_sequence_item_base | function bit | get_do_pack_done ( ) | Utility to obtain the do_pack_done setting for the object. |
| uvm_transaction | function time | get_end_time ( ) | |
| svt_sequence_item_base | static function string | get_environment_variable_value ( string method_name, string env_var_name, uvm_report_object reporter, bit is_optional = 0 ) | Function which can be used to get access to an environment variable. |
| svt_err_check_stats | function string | get_err_check_name ( ) | Returns the err_check_name field identifying the svt_err_check instance that contains this svt_err_check_stats instance (if available). |
| uvm_transaction | function uvm_event_pool | get_event_pool ( ) | |
| svt_err_check_stats | function string | get_full_name ( ) | Technology independent method which returns the full instance path for the err_check_stats instance. |
| svt_err_check_stats | function string | get_group ( ) | Returns a string with the check group. |
| uvm_transaction | function uvm_component | get_initiator ( ) | |
| uvm_object | static function int | get_inst_count ( ) | |
| svt_err_check_stats | function bit | get_is_enabled ( ) | Returns a value indicating whether the check is enabled (1) or disabled (0). |
| svt_err_check_stats | function bit | get_last_is_enabled ( ) | Returns a value indicating whether the check was last enabled (1) or disabled (0). |
| svt_sequence_item_base | function string | get_mcd_class_name ( ) | Returns the name of this class, or a class derived from this class. |
| svt_sequence_item_base | function svt_pa_object_data | get_pa_obj_data ( string uid = "", string typ = "", string parent_uid = "", string channel = "" ) | This method returns PA object which contains the PA header information for XML or FSDB. |
| uvm_sequence_item | function uvm_sequence_base | get_parent_sequence ( ) | |
| svt_err_check_stats | function bit | get_prop_val ( string prop_name, ref bit [1023:0] prop_val, input int array_ix, ref svt_sequence_item_base data_obj ) | This method is used by a component's command interface, to allow command code to retrieve the value of a single named property of a data class derived from this class. If the prop_name argument does not match a property of the class, or if the array_ix argument is not zero and does not point to a valid array element, this function returns '0'. Otherwise it returns '1', with the value of the prop_val argument assigned to the value of the specified property. However, If the property is a sub-object, a reference to it is assigned to the data_obj (ref) argument. |
| svt_sequence_item_base | function bit | get_prop_val_via_pattern ( ref svt_pattern pttrn ) | This method takes advantage of the get_prop_val method to make a simple way to extract a property pattern from a data instance. The method simply takes all of the names specified in pttrn, and uses get_prop_val to retrieve the corresponding value so it can be placed in the pattern. |
| svt_err_check_stats | function string | get_reference ( ) | Returns a string that provides only the check's reference. |
| uvm_sequence_item | function uvm_sequence_base | get_root_sequence ( ) | |
| uvm_sequence_item | function string | get_root_sequence_name ( ) | |
| uvm_sequence_item | function int | get_sequence_id ( ) | |
| uvm_sequence_item | function uvm_sequencer_base | get_sequencer ( ) | |
| uvm_sequence_item | function string | get_sequence_path ( ) | |
| svt_err_check_stats | function string | get_sub_group ( ) | Returns a string with the check sub-group. |
| svt_sequence_item_base | function string | get_suite_name ( ) | Returns the suite name associated with an object. |
| svt_sequence_item_base | static function string | get_timeunit_str ( string class_name, uvm_report_object reporter ) | Returns the timeunit that the VIP has been compiled in as a string value. |
| uvm_transaction | function integer | get_tr_handle ( ) | |
| uvm_transaction | function integer | get_transaction_id ( ) | |
| svt_sequence_item_base | function string | get_uid ( ) | This method can be used to obtain a unique identifier for a data object. |
| svt_err_check_stats | function string | get_unique_id ( ) | Returns the unique identifier which is used to register and retrieve this check in check containers. This method returns check_id_str if it set, but if it is not set it returns the description. |
| svt_sequence_item_base | function svt_pattern | get_user_fsdb_props ( ) | User method for providing additional properties, consisting of name/value pairs, that are to be included in any FSDB output. |
| uvm_sequence_item | function bit | get_use_sequence_info ( ) | |
| svt_sequence_item_base | function string | get_xml_object_block_desc ( string obj_type = "", string obj_sub_type = "", string parent_uid = "", string channel = "" ) | This method returns a string for use in the XML object block which provides basic information about the object. |
| svt_err_check_stats | protected string | group = ""; | A string that defines the group to which the check belongs. |
| svt_err_check_stats | enum value | IGNORE | |
| uvm_transaction | function bit | is_active ( ) | |
| svt_err_check_stats | protected bit | is_enabled = 1; | Indicates whether or not the check is enabled. This variable cannot be acccessed directly -- the "set_is_enabled" method must be used. |
| uvm_sequence_item | virtual function bit | is_item ( ) | |
| uvm_transaction | function bit | is_recording_enabled ( ) | |
| svt_sequence_item_base | function bit | is_safe_as_ref ( svt_xml_writer writer ) | This method indicates whether it will be safe to reference this object in the output generated by the writer. |
| svt_sequence_item_base | function bit | is_silent ( ) | Returns true if silent mode is currently enabled |
| svt_sequence_item_base | function bit | is_valid ( bit silent = 1, int kind = -1 ) | Checks to see that the data field values are valid. |
| uvm_sequence_item | static bit | issued1 | |
| uvm_sequence_item | static bit | issued2 | |
| svt_sequence_item_base | int | kind = svt_sequence_item_base::UNASSIGNED; | Used as an alternate method for the 'kind' argument to compare, is_valid, byte_size, byte_pack, and byte_unpack. If set to a value other than 10, then this value will be used rather than the 'kind' value that is passed into these methods or the policy class that is passed in. Acceptible values are RELEVANT and COMPLETE. |
| svt_sequence_item_base | enum | kind_enum | Kinds commonly recognized (i.e., via constants) by compare, is_valid, byte_size, byte_pack, and byte_unpack. Although specified as an enum, the constant values associated with these enum elements allow them to be used to define the integer 'kind' parameter to these methods. |
| svt_sequence_item_base | typedef | kind_enum | |
| svt_err_check_stats | protected bit | last_is_enabled = 1; | Indicates whether or not the check was enabled previously. This variable cannot be acccessed directly -- the "capture_is_enabled" method must be used. |
| svt_sequence_item_base | function bit | load ( int file ) | |
| svt_sequence_item_base | function bit | load_from_string ( string text ) | |
| svt_sequence_item_base | function bit | load_prop_vals ( string filename = "", int file = 0 ) | This method loads the property values from the indicated file assuming a basic text format. If filename specified without file then creates file handle and uses it to load the values. If file specified without filename then uses file to load the values. If both filename and file specified than no load is attempted and the failure is indicated via the return. |
| svt_sequence_item_base | function bit | load_prop_vals_with_checks ( string filename = "", int file = 0 ) | This method calls load_prop_vals, but enables checking on the file format and content. |
| svt_sequence_item_base | function int | log_base_2 ( int val, bit round_up = 1 ) | This method returns the log_base_2 of provided value. |
| svt_sequence_item_base | static int | max_array_elem_display = SVT_MAX_ARRAY_ELEM_DISPLAY_DEFAULT; | Used by all svt_data derived display methods to limit the number of array entries which are displayed whenever an array data member is displayed. If the number of array elements is less than or equal to the max_array_elem_display value or max_array_elem_display is set to -1, then all array elements are displayed. If max_array_elem_display is set to 0, then only the array size will be displayed. Otherwise max_array_elem_display array elements are displayed. Since this field is not owned by an individual instance, it is not copied, compared, etc., like the other svt_data properties. Initial value set to SVT_MAX_ARRAY_ELEM_DISPLAY_DEFAULT so it can be overridden at compile time. |
| svt_sequence_item_base | function void | mcd_log_object ( int mcd_log_file, string mcd_parameter ) | |
| uvm_transaction | protected function integer | m_begin_tr ( time begin_time = 0, integer parent_handle = 0, bit has_parent = 0 ) | |
| uvm_sequence_item | protected uvm_report_object | m_client | |
| uvm_sequence_item | protected string | m_client_str | |
| uvm_sequence_item | protected int | m_depth = -1; | |
| uvm_sequence_item | virtual function string | m_get_client_info ( output uvm_report_object client ) | |
| uvm_object | protected virtual function uvm_report_object | m_get_report_object ( ) | |
| uvm_object | static protected int | m_inst_count | |
| uvm_sequence_item | protected uvm_sequence_base | m_parent_sequence | |
| uvm_sequence_item | protected uvm_report_handler | m_rh | |
| uvm_sequence_item | protected uvm_sequencer_base | m_sequencer | |
| uvm_sequence_item | virtual function void | m_set_p_sequencer ( ) | |
| uvm_sequence_item | protected bit | m_use_sequence_info | |
| svt_svc_err_check_stats | function void | new ( string suite_name = "", string check_id_str = "", string group = "", string sub_group = "", string description = "", string reference = "", svt_err_check_stats :: fail_effect_enum default_fail_effect = svt_err_check_stats::ERROR, int filter_after_count = 0, bit is_enabled = 1 ) | CONSTRUCTOR: Create a new svt_err_check_stats instance, passing the appropriate argument values to the svt_data parent class. |
| svt_err_check_stats | enum value | NOTE | |
| svt_sequence_item_base | enum value | NULL | |
| uvm_object | function int | pack ( ref bit bitstream[], input uvm_packer packer ) | |
| uvm_object | function int | pack_bytes ( ref byte unsigned bytestream[], input uvm_packer packer ) | |
| uvm_object | function int | pack_ints ( ref int unsigned intstream[], input uvm_packer packer ) | |
| svt_err_check_stats | int | pass_count = 0; | Tracks the number of times that a given check has PASSED. |
| svt_sequence_item_base | function void | pack_pattern_data ( svt_pattern_data pd, uvm_packer packer ) | Pack the information associated with a single pattern_data instance. |
| svt_sequence_item_base | function int | power_of_2 ( int val ) | This method returns the power of 2 of provided value. |
| uvm_object | function void | print ( uvm_printer printer = null ) | |
| svt_sequence_item_base | function void | print_pattern_data ( svt_pattern_data pd, uvm_printer printer, input string name_override ) | Print the information associated with a single pattern_data instance. |
| uvm_sequence_item | bit | print_sequence_info | |
| svt_err_check_stats | function string | psdisplay_stats ( string prefix = "" ) | Formats the statistics (counts) about the check. |
| svt_sequence_item_base | function int | reasonable_constraint_mode ( bit on_off ) | Method to turn reasonable constraints on/off as a block. This method is not implemented in this virtual class. |
| uvm_object | function void | record ( uvm_recorder recorder = null ) | |
| svt_sequence_item_base | function void | record_pattern_data ( svt_pattern_data pd, uvm_recorder recorder, input string name_override ) | Record the information associated with a single pattern_data instance. |
| svt_sequence_item_base | enum | recursive_op_enum | Hierachical transaction options. These are used to control how embedded objects are handled for the 'copy' and 'compare' methods. |
| svt_sequence_item_base | typedef | recursive_op_enum | |
| svt_err_check_stats | protected string | reference = SVT_DATA_UTIL_UNSPECIFIED; | A string that identifies a protocol specification reference, if applicable. |
| svt_err_check_stats | function void | register_cov_override ( uvm_object_wrapper cov_override ) | Method which registers a coverage override class to be used when creating coverage for this class. |
| svt_svc_err_check_stats | function void | register_fail ( string message = "", svt_err_check_stats :: fail_effect_enum override_fail_effect = svt_err_check_stats::DEFAULT, string filename = "", int line = 0 ) | Registers a FAILED check with this class. As long as the failure has not been filtered, this method produces log output with information about the check, and the fact that it has FAILED, along with a message (if specified). |
| svt_svc_err_check_stats | function void | register_pass ( svt_err_check_stats :: fail_effect_enum override_pass_effect = svt_err_check_stats::DEFAULT, string filename = "", int line = 0 ) | Registers a PASSED check with this class. As long as the pass has not been filtered, this method produces log output with information about the check, and the fact that it has PASSED. |
| svt_sequence_item_base | enum value | RELEVANT | |
| svt_sequence_item_base | static uvm_comparer | relevant_comparer = null; | This static `SVT_XVM(comparer) can be used to request a RELEVANT compare. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| svt_sequence_item_base | static uvm_packer | relevant_packer = null; | This static `SVT_XVM(packer) can be used to request a RELEVANT pack. This is a shared packer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| svt_err_check_stats | uvm_report_object | reporter | SVT message macros route messages through this reference |
| svt_err_check_stats | function void | report_info ( string prefix = "", bit omit_disabled = 0 ) | Reports the basic information about the check: check identifier, group, sub-group, description, and reference. |
| svt_err_check_stats | function void | report_stats ( string prefix = "", bit omit_unexercised = 0 ) | Reports the statistics (counts) about the check. |
| svt_err_check_stats | function void | reset_counters ( ) | Resets all counters. |
| svt_sequence_item_base | function int | resolve_compare_kind ( int kind, uvm_comparer comparer ) | Resolves the kind value used for compare operations. |
| svt_sequence_item_base | function int | resolve_is_valid_kind ( int kind ) | Resolves the kind value used for is_valid operations. |
| svt_sequence_item_base | function int | resolve_pack_kind ( int kind, uvm_packer packer ) | Resolves the kind value used for pack/unpack operations. |
| svt_sequence_item_base | function real | safe_atoreal ( string ascii_real ) | Utility method which can be used to safely convert an ascii string to a real value, dealing with any embedded '_' characters. |
| svt_sequence_item_base | function void | save ( int file ) | |
| svt_sequence_item_base | function bit | save_child_refs ( svt_xml_writer writer, string prefix = "" ) | This method can be used to write out Unique IDs for the children of this object using the XML format. The extended class must drive this process, but can use the save_ref method on the to individual children to output those children. |
| svt_sequence_item_base | function bit | save_object_begin ( svt_xml_writer writer ) | This method uses the 'writer' class methods to write out the object begin data to file. This method is intoduced to resolve the Verdi call back issue where during concurrent transaction the order of the transaction has to be correct otherwise Verdi dumper APIs will have performance issue. |
| svt_sequence_item_base | function bit | save_object_data ( svt_xml_writer writer, string prefix = "" ) | This method writes the object start to XML/FSDB file, This method is introduced to resolve the Verdi call back issue where during concurrent transaction the order of the transaction as to be correct otherwise Verdi dumper APIs will have performance issue. |
| svt_sequence_item_base | function bit | save_pattern_to_xml ( svt_xml_writer writer, svt_pa_object_data pa_obj_data, svt_pattern pttrn, string prefix = "" ) | This method writes the property values stored in the pattern to the indicated file using the XML format. |
| svt_sequence_item_base | function bit | save_prop_vals ( string filename = "", int file = 0, string prefix = "" ) | This method saves the property values to the indicated file using a basic text format. If filename specified without file then creates file handle and uses it to saves the values. If file specified without filename then uses file to save the values. If both filename and file specified than no save is attempted and the failure is indicated via the return. |
| svt_sequence_item_base | function bit | save_prop_vals_to_fsdb ( string inst_name, string parent_object_uid = "", string stream_attr_namestream_attr_name = [$], string stream_attr_valstream_attr_val = [$] ) | This method writes the property values associated with this data object to an FSDB file. |
| svt_sequence_item_base | function bit | save_prop_vals_to_fsdb_internal ( string top_level_name, string object_channel, string parent_object_uid = "", string object_uid = "", string prefix = "" ) | This is an internal method and should not be used by external components. |
| svt_sequence_item_base | function bit | save_prop_vals_to_xml ( svt_xml_writer writer, string object_block_desc = "", string prefix = "" ) | This method writes the property values to the indicated file using the XML format. This method relies on the allocate_xml_pattern method to obtain the pattern for the property values to be saved. Therefore the preferred mechanism for altering the format is to overload the allocate_xml_pattern to define a different pattern. |
| svt_sequence_item_base | function bit | save_ref ( svt_xml_writer writer, string prefix = "" ) | This method can be used to write out the Unique IDs for an object using the XML format. |
| svt_err_check_stats | function void | set_default_fail_effect ( svt_err_check_stats :: fail_effect_enum new_default_fail_effect ) | Modifies the default handling of this check in the event of failure. |
| svt_err_check_stats | function void | set_default_pass_effect ( svt_err_check_stats :: fail_effect_enum new_default_pass_effect ) | Modifies the default handling of this check in the event of pass. |
| uvm_sequence_item | function void | set_depth ( int value ) | |
| svt_err_check_stats | function void | set_err_check_name ( string err_check_name ) | Sets the err_check_name field identifying the svt_err_check instance that contains this svt_err_check_stats instance. |
| uvm_sequence_item | function void | set_id_info ( uvm_sequence_item item ) | |
| uvm_transaction | function void | set_initiator ( uvm_component initiator ) | |
| svt_sequence_item_base | function void | set_int_local ( string field_name, uvm_bitstream_t value, bit recurse = 1 ) | Override the 'set_int_local' method to simply set the field via set_prop_val. |
| svt_err_check_stats | function void | set_is_enabled ( bit new_is_enabled ) | Modifies whether the check is enabled (1) or disabled (0). |
| uvm_sequence_item | function void | set_item_context ( uvm_sequence_base parent_seq, uvm_sequencer_base sequencer = null ) | |
| uvm_object | function void | set_object_local ( string field_name, uvm_object value, bit clone = 1, bit recurse = 1 ) | |
| uvm_sequence_item | function void | set_parent_sequence ( uvm_sequence_base parent ) | |
| svt_sequence_item_base | function bit | set_prop_object ( string prop_name, svt_sequence_item_base prop_obj, int array_ix ) | This method allows clients to assign an object to a single named property supported by a class derived from this class. This base class implementation always returns a value of '0' since the svt_sequence_item_base class has no 'object' properties. |
| svt_err_check_stats | function bit | set_prop_val ( string prop_name, bit [1023:0] prop_val, int array_ix ) | This method is used by a component's command interface, to allow command code to set the value of a single named property of a data class derived from this class. This method cannot be used to set the value of a sub-object, since sub-object consruction is taken care of automatically by the command interface. If the prop_name argument does not match a property of the class, or it matches a sub-object of the class, or if the array_ix argument is not zero and does not point to a valid array element, this function returns '0'. Otherwise it returns '1'. |
| svt_sequence_item_base | function bit | set_prop_val_via_pattern ( svt_pattern pttrn ) | This method takes advantage of the set_prop_val method to make a simple way to take a common property pattern, and apply it across multiple data instances. The method simply takes all of the name/value pairs specified in pttrn, and uses set_prop_val to apply them to the data instance. |
| svt_sequence_item_base | function void | set_prop_val_via_plusargs ( string plusarg_keyword ) | This method takes advantage of the set_prop_val method to load up a set of property values based on a command line plusarg value. |
| uvm_sequence_item | function void | set_sequence_id ( int id ) | |
| uvm_sequence_item | virtual function void | set_sequencer ( uvm_sequencer_base sequencer ) | |
| svt_sequence_item_base | function void | set_string_local ( string field_name, string value, bit recurse = 1 ) | Override the 'set_string_local' method to simply set the field via set_prop_val. |
| uvm_transaction | function void | set_transaction_id ( integer id ) | |
| uvm_sequence_item | function void | set_use_sequence_info ( bit value ) | |
| svt_sequence_item_base | enum value | SHALLOW | |
| svt_err_check_stats | static uvm_report_object | shared_reporter = svt_non_abstract_report_object; | Shared reporter used if no reporter has been provided to the class. |
| svt_sequence_item_base | static uvm_comparer | silent_complete_comparer = null; | This static `SVT_XVM(comparer) can be used to request a COMPLETE compare and to hide the messages generated due to comparison failures. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| svt_sequence_item_base | function void | silent_mode ( bit mode ) | Disables generation of internal messages. This can be used to turn off debug messages while executing a method that may itself be used as an argument to VMM message macros. Using this feature resolves the issue of embedded messages. |
| svt_sequence_item_base | static uvm_comparer | silent_relevant_comparer = null; | This static `SVT_XVM(comparer) can be used to request a RELEVANT compare and to hide the messages generated due to comparison failures. This is a shared comparer used by the VIP as well as the environment. As such any modifications will have a global impact and should be done with care. |
| uvm_object | function string | sprint ( uvm_printer printer = null ) | |
| svt_sequence_item_base | static function bit | strip_array_element_suffix ( uvm_report_object reporter, string prop_name, output string base_name, output int array_ix ) | Utility method which accepts a property name containing an array element index, and returns the base property name and the index value. |
| svt_err_check_stats | protected string | sub_group = ""; | A string that defines the sub-group to which the check belongs. |
| svt_sequence_item_base | protected string | suite_name = ""; | Identifies the product suite with which a derivative class is associated. Can be accessed through 'get_suite_name', but cannot be altered after object creation. |
| svt_svc_err_check_stats | svt_svc_message_manager | svc_msg_mgr | Handle to associated svc_msg_mgr |
| svt_svc_err_check_stats | function string | get_class_name ( ) | Returns a string giving the name of the class. |
| svt_sequence_item_base | enum value | UNASSIGNED | |
| uvm_object | function int | unpack ( ref bit bitstream[], input uvm_packer packer ) | |
| uvm_object | function int | unpack_bytes ( ref byte unsigned bytestream[], input uvm_packer packer ) | |
| uvm_object | function int | unpack_ints ( ref int unsigned intstream[], input uvm_packer packer ) | |
| svt_sequence_item_base | function void | unpack_pattern_data ( svt_pattern_data pd, uvm_packer packer ) | Unpack the information associated with a single pattern_data instance. |
| uvm_object | static bit | use_uvm_seeding = 1; | |
| uvm_sequence_item | virtual function void | uvm_report ( uvm_severity severity, string id, string message, int verbosity = UVM_LOW, string filename = "", int line = 0 ) | |
| uvm_sequence_item | function int | uvm_report_enabled ( int verbosity, uvm_severity severity = UVM_INFO, string id = "" ) | |
| uvm_sequence_item | virtual function void | uvm_report_error ( string id, string message, int verbosity = UVM_LOW, string filename = "", int line = 0 ) | |
| uvm_sequence_item | virtual function void | uvm_report_fatal ( string id, string message, int verbosity = UVM_NONE, string filename = "", int line = 0 ) | |
| uvm_sequence_item | virtual function void | uvm_report_info ( string id, string message, int verbosity = UVM_MEDIUM, string filename = "", int line = 0 ) | |
| uvm_sequence_item | virtual function void | uvm_report_warning ( string id, string message, int verbosity = UVM_MEDIUM, string filename = "", int line = 0 ) | |
| svt_err_check_stats | enum value | VERBOSE | |
| svt_err_check_stats | enum value | WARNING | |
| uvm_object | static uvm_status_container | __m_uvm_status_container = new; | |
| uvm_object | function int | get_inst_id ( ) | |
| uvm_object | function string | get_name ( ) | |
| uvm_object | function void | reseed ( ) | |
| uvm_object | function void | set_name ( string name ) | |