Called when barrier_enable is set to 1 in svt_axi_port_configuration and associate_barrier_xact bit is set in svt_axi_master_transaction class.

xact - reference to the data descriptor object of interest.

barrier_pair_xact - Barrier pair associated with this transaction

Build Phase Constructs the common class

This method is used to get list of all IDs which are currently under use by outstanding transactions. However, user can choose the type of outstanding transactions this method should consider while extracting ID of active transactions. "mode" and "rw_type" arguments should be used for this purpose.

It returns '1' if total number of unique IDs currently used by active transactions, is less than all possible ID that can be used by an AXI transaction. This helps in determining whether randomizing ID field of a new transaction which should not be part of the all the IDs currently in use, is possible or not.

mode - Type of outstanding transactions this method should consider while extracting ID of active transactions. Currently it supports following modes (defined as string) ::

• "non_dvm_non_barrier" => all transactions which are neither DVM nor Barrier (default)
• "non_dvm" => all transactions which are not DVM
• "non_barrier" => all transactions which are not Barrier
• "dvm" => all transactions which are of DVM type
• "barrier" => all transactions which are of Barrier type
• "dvm_barrier" => all transactions which are either DVM or Barrier type
• Note: if "rw_type" is set to '0' then only read channel transactions will be considered for non-dvm and non-barrier type

rw_type - Indicates which channel id width should be considered.

• ' 0 ' => only read channel id width and transactions should be used
• ' 1 ' => only write channel id width and transactions should be used
• '-1 ' => common or either of read or write channel id width and transactions are used

use_min_width - If set to '1', minimum of read and write channel id width should be used otherwise maximum. This is applicable only if "rw_type == -1" i.e. no particular channel id width is specified.

silent - Suppresses debug messages from this method if set to '1'

This method returns list of transactions which are currently active and pending inside master agent.

silent - Suppresses debug messages from this method if set to '1'. Default value is '1'.

Called when there user wants to drive user injected check values on non-transaction parity signals.

signal_context - Context why the callback is called for a given signal.

parity_signal - Name of parity signal for which the callback is being called.

calculated_parity_signal_val - Value of the parity signal.

CONSTRUCTOR: Create a new driver instance

name - The name of this instance. Used to construct the hierarchy.

parent - The component that contains this intance. Used to construct the hierarchy.

Called when there is change in the state of the cache.

xact - A reference to the data descriptor object of interest.

Called after getting a transaction from the input tlm port.

xact - A reference to the data descriptor object of interest.

drop - A bit that is set if this transaction is to be dropped.

Called after randomizing memory update transaction.

xact - A reference to the memory update descriptor object of interest.

Called by the component after pulling a AXI Service Requst out of its AXI Service Request input, but before acting on the AXI Service Request in any way.

xact - A reference to the data descriptor object of interest.

Called after pulling a snoop transaction descriptor out of the input channel which is connected to the generator, but before acting on the transaction descriptor in any way.

xact - A reference to the transaction descriptor object of interest.

drop - A ref argument, which if set by the user's callback implementation causes the transactor to discard the transaction descriptor without further action.

Called after getting a transaction from the input tlm port.

device_id_queue - A reference to the ID's of device type transactions which are currently beeing processed by the master.

non_device_id_queue - A reference to the ID's of non device type transactions which are currently beeing processed by the master.

Called before driving the address phase of a transaction.

xact - A reference to the data descriptor object of interest.

drop - A bit that is set if this transaction is to be dropped, only work before any attributes are populated.

Called before writing into the cache.

xact - A reference to the data descriptor object of interest.

Called before driving the first transfer of a data stream transaction.

xact - A reference to the data descriptor object of interest.

Called before driving the snoop data phase of a transaction

xact - A reference to the data descriptor object of interest.

Called before driving a response to a snoop transaction.

xact - A reference to the data descriptor object of interest.

Called before driving a data beat of a write transaction.

xact - A reference to the data descriptor object of interest.

drop - A bit that is set if this transaction is to be dropped, only work before any attributes are populated.

Called when a new configuration is applied to the VIP

Report phase execution of the OVM component

Run phase Starts persistent threads like consume_from_seq_item_port()

Method to set common

Method to set shared status

waits until master is out of reset state

mode - if set to '1' then it waits for 1 clock cycle after reset is detected deasserted. otherwise, it waits for reset to be sampled as deasserted and comes out of reset after waiting for the negedge of the same sampling clock that detected reset de-assertion to avoid any race condition. values greater than 1 shouldn't be used.