svt_dti_checker Class Reference

svt_err_check_stats attribute
svt_dti_checker::allow_non_secure_inst_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::allow_unpriv_inst_read_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[5] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[5] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[2] is not equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[5] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::allow_unpriv_read_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[3] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[3] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[0] is not equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[3] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::allow_unpriv_write_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is not equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP::smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For svt_dti_port_configuration :: DTI4_0, this check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is not DPTBypass

svt_err_check_stats attribute
svt_dti_checker::ats_condis_sup_t_value_on_connect_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ&DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ/svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t is 0 for DTI-ATSv3 Protocol
While sending DISCONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO for DTI-ATSv3 Protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ/svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t is 0 for DTI-ATSv3 Protocol
While sending DISCONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is ZERO for DTI-ATSv3 Protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ/svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is not ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is not ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t is 0 for DTI-ATSv3 Protocol
While sending DISCONNECT Acknowlegement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: sup_t field is not ZERO for DTI-ATSv3 Protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_cxl_io_value_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is ZERO for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: cxl is 0 for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is ZERO for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: cxl is 0 for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is not ZERO for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: cxl_io is not ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: cxl is 0 for DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_cxl_value_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: cxl is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: cxl is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: cxl is not ZERO for DTI-ATSv1 or DTI-ATSv2 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0

svt_err_check_stats attribute
svt_dti_checker::ats_inv_trusted_entity_bit_value_check

Check grouping: DTI-ATS,DTI_ATS_INV_COMP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_INV_COMP message, svt_dti_transaction :: trusted_entity is equal to the svt_dti_transaction :: DTI_ATS_INV_REQ.svt_dti_transaction:trusted_entity for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_INV_COMP message, svt_dti_transaction :: trusted_entity is equal to the svt_dti_transaction :: DTI_ATS_INV_REQ.svt_dti_transaction:trusted_entity for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_INV_COMP message, svt_dti_transaction :: trusted_entity is not equal to the svt_dti_transaction :: DTI_ATS_INV_REQ.svt_dti_transaction:trusted_entity for DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_memory_type_value_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: ats_memory_type is ZERO for DTI-ATSv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: ats_memory_type is ZERO for DTI-ATSv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: ats_memory_type is not ZERO for DTI-ATSv1 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::ats_page_req_trusted_entity_bit_value_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_PAGE_REQ message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_PAGE_REQ message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_PAGE_REQ message, svt_dti_transaction :: trusted_entity is not ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_page_resp_trusted_entity_bit_value_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_PAGE_RESP message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_PAGE_RESP message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_PAGE_RESP message, svt_dti_transaction :: trusted_entity is not ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_pri_msgs_supported_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_REQ&DTI_ATS_PAGE_RESP Check description: Checks that

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued only when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 1 for DTI-ATS protocol
svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued only when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued only when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 1 for DTI-ATS protocol
svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued only when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 0 for DTI-ATS protocol
svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued when svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: support_ats_pri_msgs is 0 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::ats_token_translation_value_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ&DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0, svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_translation_id_value_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_REQ&DTI_ATS_TRANS_RESP&DTI_ATS_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ, svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ, svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ, svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is ZERO for DTI-ATSv1, DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0, svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_translation_scope_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is ONE when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 and svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is ONE when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 and svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is not ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: global_valid is not ONE when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 and svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_3_0 or svt_dti_env_configuration :: VERSION_2_0

svt_err_check_stats attribute
svt_dti_checker::ats_trans_resp_te_oa_value_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: trusted_entity is 0 for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: trusted_entity is 0 for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is not ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: te_oa is not ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: trusted_entity is 0 for DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::ats_trusted_entity_bit_in_trans_msg_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity not is ZERO for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: trusted_entity not is ZERO when both svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: sup_t and svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: sup_t are not 1 during the connection sequence for DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::attr_over_nscfg_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is not 2'b01 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is 2'b00 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is not 2'b01 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is 2'b00 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is 2'b01 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is not 2'b00 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::attr_over_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:7] is 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:9] is 0 for DTI-TBUv2 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:7] is 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:9] is 0 for DTI-TBUv2 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:7] is not 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[15:9] is not 0 for DTI-TBUv2 or DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::available_imp_type1_req_for_imp_type1_response_check

Check grouping: DTI-TBU,IMPLEMENTATION_DEFINED Check description: Checks that

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message is issued only when atleast outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message is present for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message is issued only when atleast outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message is present for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message is issued when no outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message is present for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::available_imp_type2_req_for_imp_type2_response_check

Check grouping: DTI-TBU,IMPLEMENTATION_DEFINED Check description: Checks that

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message is issued only when atleast outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message is present for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message is issued only when atleast outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message is present for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message is issued when no outstanding svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message is present for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::available_page_req_ack_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_ACK Check description: Checks that

svt_dti_transaction :: DTI_ATS_PAGE_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_PAGE_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_PAGE_ACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::available_page_resp_respack_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_RESPACK Check description: Checks that

svt_dti_transaction :: DTI_ATS_PAGE_RESPACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or higher protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_PAGE_RESPACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or higher protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_PAGE_RESPACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or higher protocol

Applicable device type: Active DTI_SLAVE_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::available_reg_req_for_read_response_check

Check grouping: DTI-TBU,DTI_TBU_REG_RDATA Check description: Checks that

svt_dti_transaction :: DTI_TBU_REG_RDATA message is issued only when outstanding svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_REG_RDATA message is issued only when outstanding svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_REG_RDATA message is issued when no outstanding svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::available_reg_req_for_write_response_check

Check grouping: DTI-TBU,DTI_TBU_REG_WACK Check description: Checks that

svt_dti_transaction :: DTI_TBU_REG_WACK message is issued only when outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE message is present for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_REG_WACK message is issued only when outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE message is present for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_REG_WACK message is issued when no outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE message is present for DTI-TBU protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::bypass_field_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: bypass is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-ATSv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: bypass is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-ATSv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: bypass is not ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr is greater than the address range indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-ATSv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information:

For DTI-TBU protocol, this check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For DTI-ATS protocol, this check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::check_for_invalidation_token

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_INV_REQ&DTI_ATS_INV_REQ Check description: Checks that

svt_dti_transaction :: DTI_TBU_INV_REQ message is issued only when atleast one invalidation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_REQ message is issued only when atleast one invalidation token is available for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_INV_REQ message is issued only when ateast one invalidation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_REQ message is issued only when atleast one invalidation token is available for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_INV_REQ message is issued only when no invalidation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_REQ message is issued when no invalidation token is available for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::check_for_scale_num_tg_ttl

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: scale is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: num is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_granule_size is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_table_level is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: scale is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: num is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_granule_size is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_table_level is ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: scale is not ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: num is not ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_granule_size is not ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: translation_table_level is not ZERO when Invalidation operation is not using this field for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is not ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::check_for_translation_token

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_REQ&DTI_ATS_TRANS_REQ Check description: Checks that

svt_dti_transaction :: DTI_TBU_TRANS_REQ message is issued only when atleast one translation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_TRANS_REQ message is issued only when atleast one translation token is available for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_TRANS_REQ message is issued only when atleast one translation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_TRANS_REQ message is issued only when atleast one translation token is available for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_TRANS_REQ message is issued when no translation token is available for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_TRANS_REQ message is issued when no translation token is available for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::check_for_valid_ats_va_ipa_range

Check grouping: DTI-ATS,DTI_ATS_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: ats_inv_range_va_ia is not greather than d'52 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: ats_inv_range_va_ia is not greather than d'52 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: ats_inv_range_va_ia is greather than d'52 for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::check_for_valid_sid_vmid_range

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: sid_vmid_range is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, If svt_dti_transaction :: vmid is valid, then RANGE should not be greater than 4.

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: sid_vmid_range is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, If svt_dti_transaction :: vmid is valid, then RANGE is not greater than 4.

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: sid_vmid_range is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, If svt_dti_transaction :: vmid is valid, then RANGE is greater than 4.

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::check_for_valid_va_ipa

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: addr is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: addr is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: addr is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::comb_alloc_attribute_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::comb_alloc_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_allocate field is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::comb_mt_attribute_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::comb_mt_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type field is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type field is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_memory_type field is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::comb_sh_attribute_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv2 or DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::comb_sh_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: combined_shareability field is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::condis_ack_state_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: connected_state is ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: connected_state is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: connected_state is ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: connected_state is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: connected_state is not ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: connected_state is not ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: connected_state is ZERO for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::contiguous_streamid_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP&DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: contiguous_streamid field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: contiguous_streamid field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not svt_dti_transaction :: STREAM_DISABLED for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: contiguous_streamid field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: contiguous_streamid field is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not svt_dti_transaction :: STREAM_DISABLED for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: contiguous_streamid field is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: contiguous_streamid field is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not svt_dti_transaction :: STREAM_DISABLED for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed on DTI_TBU_TRANS_FAULT.CONT field only when DTI_TBU_TRANS_FAULT.FAULT_TYPE is NonAbort or Abort for svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_2_0

svt_err_check_stats attribute
svt_dti_checker::data_read_permitted_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[0] is 1 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[1] is 0 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[0] is 1 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[1] is 0 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[0] is not 1 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[1] is 0 for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::destructive_read_permitted_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::destructive_read_permitted_v4_check

Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: destructive_read_permitted is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::directed_cache_prefetch_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::directed_cache_prefetch_v4_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is GlobalBypass for DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: directed_cache_prefetch is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not svt_dti_transaction :: ATST for DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::do_not_cache_field_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: do_not_cache is ONE when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not StreamDisabled or not GlobalDisabled for the DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: do_not_cache is ONE when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not StreamDisabled or not GlobalDisabled for the DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: do_not_cache is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_FAULT.svt_dti_transaction :: fault_type is not StreamDisabled or not GlobalDisabled for the DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_ats_no_translation_invalidation_token_zero_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_invalidation is ZERO when svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_invalidation is ZERO when svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_invalidation is not ZERO when svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_ats_no_translation_msg_type_check

Check grouping: DTI-ATS,Message_Validity Check description: Checks that

Transalation, Invalidation and Synchronization group messages are not issued when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

Transalation, Invalidation and Synchronization group messages are not issued when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

Transalation, Invalidation or Synchronization group message is issued when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_ats_no_translation_trl_gnt_token_zero_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction:: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction:: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction:: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation is not ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_ats_no_translation_trl_req_token_zero_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ Check description: Checks that

In the svt_dti_transaction:: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction:: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation is ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction:: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation is not ZERO when svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: no_trans is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_ats_no_translation_value_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is ZERO for DTI-ATSv1 protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is equal to the value of svt_dti_transaction :: no_trans in the previous connect Request for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is ZERO for DTI-ATSv1 protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is equal to the value of svt_dti_transaction :: no_trans in the previous connect Request for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is not ZERO for DTI-ATSv1 protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: no_trans is not equal to the value of svt_dti_transaction :: no_trans in the previous connect Request for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_ident_one_flow_atst_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is ATST when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is ATST when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is not ATST when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_nse_ns_in_trans_resp_when_sec_sid_realm

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 or DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 or DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1, svt_dti_transaction :: bp_type is StreamBypass and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 or DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0 or svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_nse_ns_in_trans_resp_when_sec_sid_secure

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b0 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b0 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol
Fail condition:
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b0 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b01, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol
Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU
Additional information: This check is applicable only when:
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_non_secure_mpam_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is not Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_non_secure_trans_req_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_non_secure_trans_resp_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-Secure for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_realm_mpam_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is not Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_realm_trans_req_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_realm_trans_resp_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_secure_mpam_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: mpamnse,svt_dti_transaction :: mpamns} is not Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_secure_trans_req_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_one_sec_sid_secure_trans_resp_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not Non-Secure or Secure when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Secure for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_alloc_cfg_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_allocation is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_allocation is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_allocation is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_attr_ovr_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_bypass_type_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_bypass_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bypass is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_fault_response_msg_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

Translation Response is svt_dti_transaction :: DTI_TBU_TRANS_FAULT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr exceeds svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBUv3 protocol

Pass condition:

Translation Response is svt_dti_transaction :: DTI_TBU_TRANS_FAULT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr exceeds svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBUv3 protocol

Fail condition:

Translation Response is not svt_dti_transaction :: DTI_TBU_TRANS_FAULT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr exceeds svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_fault_response_type_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: NON_ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: NON_ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: NON_ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not svt_dti_transaction :: NO_PERM_REQ and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_ident_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: ident is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: ident is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: ident is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_ind_pnu_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_inst_cfg_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_nse_ns_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ message. {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ message. {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ message. {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_nsx_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[5] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_partid_pmg_hwattr_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_priv_cfg_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_mmuv_zero_sid_ssid_ssv_sec_sid_flow_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: stream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: stream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: stream_id is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 0 for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_reqex_zero_permitted_trans_resp_msg_type_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESPEX Check description: Checks that

Translation Response message type is not svt_dti_transaction :: DTI_TBU_TRANS_RESPEX when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: reqex is 0 for DTI-TBUv3 protocol

Pass condition:

Translation Response message type is not svt_dti_transaction :: DTI_TBU_TRANS_RESPEX when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: reqex is 0 for DTI-TBUv3 protocol

Fail condition:

Translation Response message type is svt_dti_transaction :: DTI_TBU_TRANS_RESPEX when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: reqex is 0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_tbu_condis_ack_valid_state_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK&Message_Validity Check description: Checks that

CONNECT Acknowledgement message is issed only when channel is in REQ_CONNECT state for DTI-TBU or DTI-ATS protocol
DISCONNECT Acknowledgement message is issed only when channel is in REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Pass condition:

CONNECT Acknowledgement message is issed when channel is in REQ_CONNECT state for DTI-TBU or DTI-ATS protocol
DISCONNECT Acknowledgement message is issed when channel is in REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Fail condition:

CONNECT Acknowledgement message is issed when channel is not in REQ_CONNECT state for DTI-TBU or DTI-ATS protocol
DISCONNECT Acknowledgement message is issed when channel is not in REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_MASTER_TBU&Passive DTI_SLAVE_TCU&Active DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_tbu_condis_req_valid_state_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_REQ&DTI_ATS_CONDIS_REQ&Message_Validity Check description: Checks that

CONNECT Request message is issed only when channel is in DISCONNECTED state for DTI-TBU or DTI-ATS protocol
DISCONNECT Request message is issed only when channel is in CONNECTED state for DTI-TBU or DTI-ATS protocol

Pass condition:

CONNECT Request message is issed when channel is in DISCONNECTED state for DTI-TBU or DTI-ATS protocol
DISCONNECT Request message is issed when channel is in CONNECTED state for DTI-TBU or DTI-ATS protocol

Fail condition:

CONNECT Request message is issed when channel is not in DISCONNECTED state for DTI-TBU or DTI-ATS protocol
DISCONNECT Request message is issed only when channel is not in CONNECTED state for DTI-TBU or DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version

svt_err_check_stats attribute
svt_dti_checker::dti_tbu_imp_msg_type1_msg_type_field_encoding_check

Check grouping: DTI-TBU,IMPLEMENTATION_DEFINED Check description: Checks that

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message, svt_dti_transaction :: msg_type value is 0xE for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message, svt_dti_transaction :: msg_type value is 0xE for DTI-TBU protocol

Pass condition:

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message, svt_dti_transaction :: msg_type value is 0xE for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message, svt_dti_transaction :: msg_type value is 0xE for DTI-TBU protocol

Fail condition:

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE1_REQ message, svt_dti_transaction :: msg_type value is not 0xE for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE1_RESP message, svt_dti_transaction :: msg_type value is not 0xE for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_tbu_imp_msg_type2_msg_type_field_encoding_check

Check grouping: DTI-TBU,IMPLEMENTATION_DEFINED Check description: Checks that

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message, svt_dti_transaction :: msg_type value is 0xF for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message, svt_dti_transaction :: msg_type value is 0xF for DTI-TBU protocol

Pass condition:

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message, svt_dti_transaction :: msg_type value is 0xF for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message, svt_dti_transaction :: msg_type value is 0xF for DTI-TBU protocol

Fail condition:

In svt_dti_transaction :: DTI_TBU_MASTER_IMP_DEF_TYPE2_REQ message, svt_dti_transaction :: msg_type value is not 0xF for DTI-TBU protocol
In svt_dti_transaction :: DTI_TBU_SLAVE_IMP_DEF_TYPE2_RESP message, svt_dti_transaction :: msg_type value is not 0xF for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_tbu_trans_req_flow_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is not NOSTALL or PRI for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is not NOSTALL or PRI for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: flow is not NOSTALL or PRI for DTI-TBUv1 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_bp_type_permitted_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not StreamBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not StreamBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is StreamBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is GlobalBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_trans_bp_type_reserved_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not 2'b11 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not 2'b00 for DTI-TBUv1, DTI-TBUv2 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not 2'b11 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is not 2'b00 for DTI-TBUv1, DTI-TBUv2 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is 2'b11 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is 2'b00 for DTI-TBUv1, DTI-TBUv2 or DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::dti_trans_ident_output_address_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ident is 1 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_mmuv_one_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is ONE when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is ONE when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is not ONE when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_mmuv_zero_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is G for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is G for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: mmuv is not ZERO when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is G for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_nscfg_use_incoming_when_sec_sid_ns_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_resp_aset_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability_set is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability_set is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability_set is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_resp_trans_rng_value_v3_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 4'b1111 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 4'b1111 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 4'b1111 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::dti_trans_respex_mecid_zero_check

Check grouping: DTI-TBU, DTI_TBU_TRANS_RESPEX Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is not Realm for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.mmuv is ZERO for DTI-TBUv3 or DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is not Realm for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.mmuv is ZERO for DTI-TBUv3 or DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is not Realm for DTI-TBUv3 or DTI-TBUv4 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: mecid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.mmuv is ZERO for DTI-TBUv3 or DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable only when:
- svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0
- svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0 or svt_dti_port_configuration :: DTI4_0
For svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: DTI3_0, This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_RESP.{svt_dti_transaction :: non_secure_extension , svt_dti_transaction :: non_secure_access} is not Realm

svt_err_check_stats attribute
svt_dti_checker::dti_trans_stream_world_el3_v3_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_3 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is MG for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not svt_dti_transaction :: EXCEPTION_LEVEL_3 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is MG for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is MG for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::instruction_access_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_REQ&DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: WRITE_PERM_REQ or svt_dti_transaction :: READ_WRITE_PERM_REQ or svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: WRITE_PERM_REQ or svt_dti_transaction :: READ_WRITE_PERM_REQ or svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: instruction_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: WRITE_PERM_REQ or svt_dti_transaction :: READ_WRITE_PERM_REQ or svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: instruction_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: instruction_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 or svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction:read_write_access is 0 for svt_dti_env_configuration :: VERSION_2_0

svt_err_check_stats attribute
svt_dti_checker::instruction_reads_permitted_check

Check grouping: DTI-ATS,DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[0] is 0 for DTI-ATS protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: instruction_access is 0 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[0] is 0 for DTI-ATS protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: instruction_access is 0 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: allow_permissions_ats[0] is 0 for DTI-ATS protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: allow_permissions_ats[2] is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: instruction_access is 0 for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_msg_in_connected_state

Check grouping: DTI-TBU&DTI-ATS,Message_Validity Check description: Checks that

CONNECT Request, CONNECT Acknowledgment and DICONNECT Acknowledgment messages are not issued when channel is in svt_dti_transaction :: CONNECTED state for DTI-TBU or DTI-ATS protocol

Pass condition:

CONNECT Request, CONNECT Acknowledgment and DICONNECT Acknowledgment messages are not issued when channel is in svt_dti_transaction :: CONNECTED state for DTI-TBU or DTI-ATS protocol

Fail condition:

CONNECT Request, CONNECT Acknowledgment or DICONNECT Acknowledgment messages is issued when channel is in svt_dti_transaction :: CONNECTED state for DTI-TBU or DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_msg_in_disconnected_state

Check grouping: DTI-TBU&DTI-ATS,Message_Validity Check description: Checks that

CONNECT Request message is only issued when channel is in svt_dti_transaction :: DISCONNECTED state for DTI-TBU or DTI-ATS protocol

Pass condition:

CONNECT Request message is issued when channel is in svt_dti_transaction :: DISCONNECTED state for DTI-TBU or DTI-ATS protocol

Fail condition:

Some other message is issued instead of CONNECT Request message when channel is in svt_dti_transaction :: DISCONNECTED state for DTI-TBU or DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_msg_in_req_connect_state

Check grouping: DTI-TBU&DTI-ATS,Message_Validity Check description: Checks that

CONNECT Acknowledment message(Connect Accept or Connect Deny) is only issued when channel is in svt_dti_transaction :: REQ_CONNECT state for DTI-TBU or DTI-ATS protocol

Pass condition:

CONNECT Acknowledment message(Connect Accept or Connect Deny) is issued when channel is in svt_dti_transaction :: REQ_CONNECT state for DTI-TBU or DTI-ATS protocol

Fail condition:

Some other message is issued instead of CONNECT Acknowledment message(Connect Accept or Connect Deny) when channel is in svt_dti_transaction :: REQ_CONNECT state for DTI-TBU or DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_msg_in_req_disconnect_state

Check grouping: DTI-TBU&DTI-ATS,Message_Validity Check description: Checks that

Downstream messages are not issed when channel is in svt_dti_transaction :: REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Pass condition:

Downstream messages are not issed when channel is in svt_dti_transaction :: REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Fail condition:

Downstream message is issed when channel is in svt_dti_transaction :: REQ_DISCONNECT state for DTI-TBU or DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::inv_size_check

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: invalidation_size is not ZERO when Invalidation operation is not using this field for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::inv_substream_id_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_INV_REQ&DTI_ATS_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: substream_id is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: substream_id is ZERO when Invalidation operation is not using this field for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: substream_id is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: substream_id is ZERO when Invalidation operation is not using this field for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: substream_id is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_INV_REQ message, svt_dti_transaction :: substream_id is not ZERO when Invalidation operation is not using this field for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_MASTER_TBU&Passive DTI_SLAVE_TCU&Active DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_sec_sid_for_v3_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure or Secure when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure or Secure when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not Non-secure or Secure when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is M for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::invalid_trans_range_when_byapss_one

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is equal to the svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is equal to the svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 0x0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is equal to the svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is equal to the svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 0x0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not equal to the svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not equal to the svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 0x0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information:

For DTI-ATS protocol, this check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For DTI-TBU protocol, this check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0

svt_err_check_stats attribute
svt_dti_checker::invalid_trans_range_when_byapss_zero

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-ATSv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-ATSv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, size of svt_dti_transaction :: translation_address_range is greater than the size indicated by svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 0 for DTI-ATSv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information:

For DTI-TBU protocol, this check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For DTI-ATS protocol, this check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::invalidation_range_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBUv1 or DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is not greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBUv1 or DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is greater than the size indicated by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size field for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalidation_range_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is 4'b0000 to 4'b0110 or 4'b1000 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is 4'b0000 to 4'b0110 or 4'b1000 or 4'b1010 or 4'b1011 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is 4'b0000 to 4'b0110 or 4'b1000 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is 4'b0000 to 4'b0110 or 4'b1000 or 4'b1010 or 4'b1011 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is not 4'b0000 to 4'b0110 or 4'b1000 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: invalidation_address_range is not 4'b0000 to 4'b0110 or 4'b1000 or 4'b1010 or 4'b1011 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::inv_valid_vmid_check

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: vmid is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: vmid is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: vmid is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::invalid_fault_type_abort

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is SPEC for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is SPEC for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: ABORT when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is SPEC for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 for svt_dti_env_configuration :: VERSION_2_0

svt_err_check_stats attribute
svt_dti_checker::invalid_fault_type_global_disabled

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: GLOBAL_DISABLED when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not svt_dti_transaction :: GLOBAL_DISABLED when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: GLOBAL_DISABLED when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::invalid_fault_type_translation_pri

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is PRI for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is PRI and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not SPEC for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is PRI for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is PRI and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not SPEC for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not PRI for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_PRI when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not PRI or svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is SPEC for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::invalid_fault_type_translation_stall

Check grouping: DTI-TBU,DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is Stall for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is Stall and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not SPEC for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is Stall for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is Stall and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is not SPEC for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not Stall for DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is svt_dti_transaction :: TRANSLATION_STALL when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not Stall or svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is SPEC for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::memattr_zero_when_mtcfg_zero

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[3:0] is 4'b0 when svt_dti_transaction :: override_attributes[4] is 0 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[3:0] is 4'b0 when svt_dti_transaction :: override_attributes[4] is 0 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[3:0] is not 4'b0 when svt_dti_transaction :: override_attributes[4] is 0 for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::mpamns_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::multiple_ats_inv_reqs_with_same_sid_and_itag

Check grouping: DTI-ATS,DTI_ATS_INV_REQ Check description: Checks that

Only one outstanding svt_dti_transaction :: DTI_ATS_INV_REQ message is exists with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Pass condition:

Only one outstanding svt_dti_transaction :: DTI_ATS_INV_REQ message is exists with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Fail condition:

Multiple outstanding svt_dti_transaction :: DTI_ATS_INV_REQ message are exist with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_inv_req_for_sync_req_check

Check grouping: DTI-ATS,DTI_ATS_SYNC_REQ Check description: Checks that

svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATSv1 or DTI-ATSv2 protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATSv1 or DTI-ATSv2 protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued when Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATSv1 or DTI-ATSv2 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F or svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_3_0 and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_page_req_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_REQ Check description: Checks that

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_PAGE_REQ message is issued when Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_REQ message is present for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_page_resp_check

Check grouping: DTI-ATS,DTI_ATS_PAGE_RESP Check description: Checks that

svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

svt_dti_transaction :: DTI_ATS_PAGE_RESP message is issued when Unacknowledged svt_dti_transaction :: DTI_ATS_PAGE_RESP message is present for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_reg_req_check

Check grouping: DTI-TBU,DTI_TBU_REG_WRITE&DTI_TBU_REG_READ Check description: Checks that

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued only when no outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued only when no outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued only when no outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued only when no outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued when outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued when outstanding svt_dti_transaction :: DTI_TBU_REG_WRITE or svt_dti_transaction :: DTI_TBU_REG_READ message is present for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_sync_req_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_SYNC_REQ&DTI_ATS_SYNC_REQ Check description: Checks that

svt_dti_transaction :: DTI_TBU_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued only when no Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_SYNC_REQ message is issued when Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_REQ message is issued when Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::no_outstanding_trans_req_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_REQ&DTI_ATS_CONDIS_REQ Check description: Checks that

Using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading transaltion Requests are preset for DTI-TBU protocol
Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading transaltion Requests are preset for DTI-ATS protocol

Pass condition:

Using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading transaltion Requests are preset for DTI-TBU protocol
Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading transaltion Requests are preset for DTI-ATS protocol

Fail condition:

Using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, DISCONNECT Request is sent only when oustading transaltion Requests are preset for DTI-TBU protocol
Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent only when oustading transaltion Requests are preset for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::non_secure_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ&DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::ns_in_trans_resp_when_nsovr_zero

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_non_secure_access is 0 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_non_secure_access is 0 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: non_secure_access is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_non_secure_access is 0 for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 .

svt_err_check_stats attribute
svt_dti_checker::ns_in_trans_resp_when_sec_sid_secure

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b01 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: override_attributes[8:7] is 2'b11 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not 2'b11 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b10 for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, {svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.{svt_dti_transaction :: non_secure_extension,svt_dti_transaction :: non_secure_access} when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 'b10, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: override_attributes[8:7] is 2'b0 for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0 .

svt_err_check_stats attribute
svt_dti_checker::num_outstanding_page_req_check

Check grouping: DTI-ATS,DTI_ATS_CONDIS_REQ Check description: Checks that

Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading page Requests are present for DTI-ATS protocol

Pass condition:

Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent only when no oustading page Requests are present for DTI-ATS protocol

Fail condition:

Using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, DISCONNECT Request is sent when oustading page Requests are present for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_ATS&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::output_address_size_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: output_address_size is with in the range 0x0 to 0x6 for DTI-ATSv1 protocol and zero for DTI-ATSv2 ,DTI-ATSv3 protocols
In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: output_address_size is with in the range 0x0 to 0x6 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: output_address_size is with in the range 0x0 to 0x6 for DTI-ATSv1 protocol and zero for DTI-ATSv2 ,DTI-ATSv3 protocols
In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: output_address_size is with in the range 0x0 to 0x6 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: output_address_size is not with in the range 0x0 to 0x6 for DTI-ATSv1 protocol or non-zero for DTI-ATSv2 ,DTI-ATSv3 protocols
In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: output_address_size is not with in the range 0x0 to 0x6 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version . .

svt_err_check_stats attribute
svt_dti_checker::override_non_secure_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b00 for DTI-TBuv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b10 or 2'b11 for DTI-TBuv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b00 for DTI-TBuv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b10 or 2'b11 for DTI-TBuv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b00 for DTI-TBuv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.override_attributes[8:7] is 2'b10 or 2'b11 for DTI-TBuv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0

svt_err_check_stats attribute
svt_dti_checker::part_id_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::part_id_rsvd_v3_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP&DTI_TBU_TRANS_RESPEX Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id[9] is ZERO for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: part_id[11:9] is ZERO for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id[9] is ZERO for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: part_id[11:9] is ZERO for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: part_id[9] is not ZERO for DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESPEX message, svt_dti_transaction :: part_id[11:9] is not ZERO for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::pending_ats_inv_req_exists_for_inv_comp

Check grouping: DTI-ATS,DTI_ATS_INV_COMP Check description: Checks that

For svt_dti_transaction :: DTI_ATS_INV_COMP message, only one outstanding svt_dti_transaction :: DTI_ATS_INV_REQ exists with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Pass condition:

For svt_dti_transaction :: DTI_ATS_INV_COMP message, only one outstanding svt_dti_transaction :: DTI_ATS_INV_REQ exists with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Fail condition:

For svt_dti_transaction :: DTI_ATS_INV_COMP message, no outstanding svt_dti_transaction :: DTI_ATS_INV_REQ exists with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol
For svt_dti_transaction :: DTI_ATS_INV_COMP message, multiple outstanding svt_dti_transaction :: DTI_ATS_INV_REQ exist with same svt_dti_transaction :: stream_id and svt_dti_transaction :: inv_tag for DTI-ATSv3 protocol

Applicable device type: Active DTI_SLAVE_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI3_0

svt_err_check_stats attribute
svt_dti_checker::pending_inv_req_exists

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_INV_ACK&DTI_ATS_INV_ACK Check description: Checks that

svt_dti_transaction :: DTI_TBU_INV_ACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_TBU_INV_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_ACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_INV_ACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_TBU_INV_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_ACK message is issued only when atleast one Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_INV_ACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_TBU_INV_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_INV_ACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_ATS_INV_REQ message is present for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::pmg_rsvd_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is not ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is not ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: pmg is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

logic attribute
svt_dti_checker::previous_reset = 1

Last sampled value of reset

svt_err_check_stats attribute
svt_dti_checker::privileged_access_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_REQ&DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: privileged_access is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: perm_req is svt_dti_transaction :: NO_PERM_REQ for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: privileged_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is svt_dti_transaction :: ATST for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: privileged_access is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 for svt_dti_env_configuration :: VERSION_2_0

svt_err_check_stats attribute
svt_dti_checker::priv_read_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[3] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[3] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[3] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::priv_write_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[4] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[4] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[4] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For svt_dti_port_configuration :: DTI4_0, this check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is not DPTBypass

svt_err_check_stats attribute
svt_dti_checker::protocol_bit_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_REQ&DTI_ATS_CONDIS_REQ&DTI_TBU_TRANS_REQ&DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_CONDIS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: protocol is ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: protocol is ONE for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: protocol is ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: protocol is ONE for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_REQ or svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: protocol is not ZERO for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_REQ or svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: protocol is not ONE for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::protocol_version_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: protocol_version is not greather than svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: protocol_version is not greather than svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: protocol_version is not greather than svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: protocol_version is not greather than svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: protocol_version is greather than svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: protocol_version is greather than svt_dti_transaction :: DTI_ATS_CONDIS_REQ.svt_dti_transaction :: protocol_version for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::protocol_version_rsvd_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_REQ&DTI_ATS_CONDIS_REQ&DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK Check description: Checks that

In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_3_0 for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0 or 4'b1 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0,4'b1 or 4'b10 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0,4'b1,4'b10 or 4'b11 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G for DTI-TBU or DTI-ATS protocol

Pass condition:

In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_3_0 for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0 or 4'b1 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0,4'b1 or 4'b10 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is 4'b0,4'b1,4'b10 or 4'b11 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G for DTI-TBU or DTI-ATS protocol

Fail condition:

In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is not 4'b0 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 or svt_dti_env_configuration :: VERSION_3_0 for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is not 4'b0 or 4'b1 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is not 4'b0,4'b1 or 4'b10 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F for DTI-TBU or DTI-ATS protocol
In the Connect Request or Connect Acknowledgment messages, svt_dti_transaction :: protocol_version is not 4'b0,4'b1,4'b10 or 4'b11 when svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G for DTI-TBU or DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::read_write_access_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: read_write_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: read_write_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: read_write_access is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: speculative_translation is 1 for DTI-TBUv1 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::register_access_supported_check

Check grouping: DTI-TBU,DTI_TBU_REG_WRITE&DTI_TBU_REG_READ Check description: Checks that

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 1 for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 1 for DTI-TBU protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 1 for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 1 for DTI-TBU protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_REG_WRITE message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 0 for DTI-TBU protocol
svt_dti_transaction :: DTI_TBU_REG_READ message is issued only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: support_register_access is 0 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

uvm_report_object attribute
svt_dti_checker::reporter

UVM report server passed in through the constructor

svt_err_check_stats attribute
svt_dti_checker::s1_hw_attribute_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO for DTI-TBUv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is ZERO for DTI-TBUv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_1_S2 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage1_hw_attr is not ZERO for DTI-TBUv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 .

svt_err_check_stats attribute
svt_dti_checker::s2_hw_attribute_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: stage2_hw_attr is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 .

svt_err_check_stats attribute
svt_dti_checker::secure_stream_id_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv1 OR DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv1 OR DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is Non-secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not Non-secure when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv1 OR DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: secure_stream_id is not Non-secure or Realm when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::smmu_stream_world_and_bypass_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Non-secure for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL3 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::strw_is_el1_or_el2_when_sec_sid_one

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL1 or EL2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL1 or EL2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL1 or EL2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid svt_dti_env_configuration :: dti_spec_version when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 .

svt_err_check_stats attribute
svt_dti_checker::strw_is_el1_s2_when_ssv_one

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is not EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: smmu_stream_world is EL1-S2 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version except svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_2_0 .

svt_err_check_stats attribute
svt_dti_checker::substream_id_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_REQ&DTI_ATS_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: substream_id is ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: substream_id is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_REQ message, svt_dti_transaction :: substream_id is not ZERO when svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: valid_substream is 0 for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::sync_req_exists

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_SYNC_ACK&DTI_ATS_SYNC_ACK Check description: Checks that

svt_dti_transaction :: DTI_TBU_SYNC_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Pass condition:

svt_dti_transaction :: DTI_TBU_SYNC_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_ACK message is issued only when Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Fail condition:

svt_dti_transaction :: DTI_TBU_SYNC_ACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_TBU_SYNC_REQ message is present for DTI-TBU protocol
svt_dti_transaction :: DTI_ATS_SYNC_ACK message is issued when no Unacknowledged svt_dti_transaction :: DTI_ATS_SYNC_REQ message is present for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::tbi_field_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: tbi is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: tbi is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: tbi is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::tbu_nscfg_rsvd_when_bp_type_is_dptbypass

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[8:7] is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm, svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: mmuv is 1, svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::tbu_trans_resp_dptbypass_permitted_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is DPTBypass only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is DPTBypass only when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is Realm and svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: bp_type is DPTBypass when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is not Realm or svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is not ATST for DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::tbu_trans_resp_write_permissions_when_dptbypass

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP::bp_type is DPTByass for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP::bp_type is DPTByass for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: allow_permissions[1] is not equal to svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: allow_permissions[4] when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP::bp_type is DPTByass for DTI-TBUv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::tbu_trans_rng_when_bp_type_is_dptbypass

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBuv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBuv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 4'b1111 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 and svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bp_type is DPTBypass for DTI-TBuv4 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::tok_trans_gnt_in_connected_state_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_ACK&DTI_ATS_CONDIS_ACK Check description: Checks that

While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv1 or DTI-TBUv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv3 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv3 protocol

Pass condition:

While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv1 or DTI-TBUv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv3 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv3 protocol

Fail condition:

While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv1 or DTI-TBUv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_TBU_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_TBU_CONDIS_REQ message for DTI-TBUv3 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is greather than the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv1 or DTI-ATSv2 protocol
While sending CONNECT Acknowledgement using svt_dti_transaction :: DTI_ATS_CONDIS_ACK message, svt_dti_transaction :: token_translation field is not equal to the value of the svt_dti_transaction :: token_translation present in the svt_dti_transaction :: DTI_ATS_CONDIS_REQ message for DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::tok_trans_req_when_disconnect_requested_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_CONDIS_REQ&DTI_ATS_CONDIS_REQ Check description: Checks that

While sending DISCONNECT Request using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, svt_dti_transaction :: token_translation field is equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_TBU_CONDIS_ACK message that acknowledged the connection of the channel for DTI-TBU protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation field is equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_ATS_CONDIS_ACK message that acknowledged the connection of the channel for DTI-ATS protocol

Pass condition:

While sending DISCONNECT Request using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, svt_dti_transaction :: token_translation field is equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_TBU_CONDIS_ACK message that acknowledged the connection of the channel for DTI-TBU protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation field is equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_ATS_CONDIS_ACK message that acknowledged the connection of the channel for DTI-ATS protocol

Fail condition:

While sending DISCONNECT Request using svt_dti_transaction :: DTI_TBU_CONDIS_REQ message, svt_dti_transaction :: token_translation field is not equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_TBU_CONDIS_ACK message that acknowledged the connection of the channel for DTI-TBU protocol
While sending DISCONNECT Request using svt_dti_transaction :: DTI_ATS_CONDIS_REQ message, svt_dti_transaction :: token_translation field is not equal to the svt_dti_transaction :: token_translation of the previous svt_dti_transaction :: DTI_ATS_CONDIS_ACK message that acknowledged the connection of the channel for DTI-ATS protocol

Applicable device type: Passive DTI_MASTER_TBU&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::translation_id_check

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_REQ&DTI_TBU_TRANS_RESP&DTI_TBU_TRANS_FAULT&DTI_ATS_TRANS_REQ&DTI_ATS_TRANS_RESP&DTI_ATS_TRANS_FAULT Check description: Checks that

Only one outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ message is exists with same svt_dti_transaction :: id for DTI-TBU protocol
Only one outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ message is exists with same svt_dti_transaction :: id for DTI-ATS protocol
For svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, only one outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-TBU protocol
For svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, only one outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-ATS protocol

Pass condition:

Only one outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ message is exists with same svt_dti_transaction :: id for DTI-TBU protocol
Only one outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ message is exists with same svt_dti_transaction :: id for DTI-ATS protocol
For svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, only one outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-TBU protocol
For svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, only one outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-ATS protocol

Fail condition:

Multiple outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ message are exist with same svt_dti_transaction :: id for DTI-TBU protocol
Multiple outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ message are exist with same svt_dti_transaction :: id for DTI-ATS protocol
For svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, multiple outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ exist with same svt_dti_transaction :: id for DTI-TBU protocol
For svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, multiple outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ exist with same svt_dti_transaction :: id for DTI-ATS protocol
For svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, no outstanding svt_dti_transaction :: DTI_TBU_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-TBU protocol
For svt_dti_transaction :: DTI_ATS_TRANS_RESP or svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, no outstanding svt_dti_transaction :: DTI_ATS_TRANS_REQ exists with same svt_dti_transaction :: id for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::translation_id_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ&DTI_TBU_TRANS_RESP&DTI_TBU_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ, svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is ZERO for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ, svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is ZERO for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ, svt_dti_transaction :: DTI_TBU_TRANS_RESP or svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: id[11:8] is not ZERO for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::translation_scope_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: global_valid is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::translation_shareability_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is not 2'b01 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is not 2'b01 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: shareability is 2'b01 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

bit [SVT_DTI_MAX_TRL_TOKEN_WIDTH-1:0] attribute
svt_dti_checker::translation_token_requested = 0

Used to store TOK_TRANS_REQ from DTI_TBU_CONDIS_REQ message

svt_err_check_stats attribute
svt_dti_checker::valid_asid_attr_over_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: asid is 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is 0x0020 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[6:4] is 3'b010 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: asid is 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is 0x0020 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[6:4] is 3'b010 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: asid is 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes is 0x0020 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_attributes[6:4] is not 3'b010 when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::valid_asid_check

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: asid is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: asid is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: asid is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_fault_type

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_FAULT&DTI_ATS_TRANS_FAULT Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not 3'b110 or 3'b111 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not 3'b110,3'b101,3'b110 or 3'b111 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: ats_fault_type is not 2'b11 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not 3'b110 or 3'b111 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is not 3'b110,3'b101,3'b110 or 3'b111 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: ats_fault_type is not 2'b11 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is 3'b110 or 3'b111 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_FAULT message, svt_dti_transaction :: fault_type is 3'b110,3'b101,3'b110 or 3'b111 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_FAULT message, svt_dti_transaction :: ats_fault_type is 2'b11 for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information:

For DTI-TBU protocol,This check is applicable only when:
- svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0
- svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0 or svt_dti_port_configuration :: DTI2_0 or svt_dti_port_configuration :: DTI3_0
For DTI-ATS protocol, this check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version

svt_err_check_stats attribute
svt_dti_checker::valid_inc_aset1_field

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is ONE for the following TLBI invalidation operations for DTI-TBU protocol
- TLBI_S_EL1_ALL, TLBI_S_EL1_VAA, TLBI_NS_EL1_ALL, TLBI_NS_EL1_S1_VMID, TLBI_NS_EL1_S12_VMID, TLBI_NS_EL1_VAA, TLBI_NS_EL1_S2_IPA,TLBI_NS_EL2_ALL, TLBI_NS_EL2_VAA, TLBI_S_EL3_ALL, TLBI_S_EL1_S1_VMID, TLBI_S_EL1_S12_VMID, TLBI_S_EL1_S2_S_IPA, TLBI_S_EL1_S2_NS_IPA,TLBI_S_EL2_ALL, TLBI_S_EL2_VAA, TLBI_RL_EL1_ALL, TLBI_RL_EL1_S1_VMID, TLBI_RL_EL1_S12_VMID, TLBI_RL_EL1_VAA, TLBI_RL_EL1_S2_IPA,TLBI_RL_EL2_ALL, TLBI_RL_EL2_VAA

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is ONE for the following TLBI invalidation operations for DTI-TBU protocol
- TLBI_S_EL1_ALL, TLBI_S_EL1_VAA, TLBI_NS_EL1_ALL, TLBI_NS_EL1_S1_VMID, TLBI_NS_EL1_S12_VMID, TLBI_NS_EL1_VAA, TLBI_NS_EL1_S2_IPA,TLBI_NS_EL2_ALL, TLBI_NS_EL2_VAA, TLBI_S_EL3_ALL, TLBI_S_EL1_S1_VMID, TLBI_S_EL1_S12_VMID, TLBI_S_EL1_S2_S_IPA, TLBI_S_EL1_S2_NS_IPA,TLBI_S_EL2_ALL, TLBI_S_EL2_VAA, TLBI_RL_EL1_ALL, TLBI_RL_EL1_S1_VMID, TLBI_RL_EL1_S12_VMID, TLBI_RL_EL1_VAA, TLBI_RL_EL1_S2_IPA,TLBI_RL_EL2_ALL, TLBI_RL_EL2_VAA

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: inc_aset1 is not ONE for one of the following TLBI invalidation operations for DTI-TBU protocol
- TLBI_S_EL1_ALL, TLBI_S_EL1_VAA, TLBI_NS_EL1_ALL, TLBI_NS_EL1_S1_VMID, TLBI_NS_EL1_S12_VMID, TLBI_NS_EL1_VAA, TLBI_NS_EL1_S2_IPA,TLBI_NS_EL2_ALL, TLBI_NS_EL2_VAA, TLBI_S_EL3_ALL, TLBI_S_EL1_S1_VMID, TLBI_S_EL1_S12_VMID, TLBI_S_EL1_S2_S_IPA, TLBI_S_EL1_S2_NS_IPA,TLBI_S_EL2_ALL, TLBI_S_EL2_VAA, TLBI_RL_EL1_ALL, TLBI_RL_EL1_S1_VMID, TLBI_RL_EL1_S12_VMID, TLBI_RL_EL1_VAA, TLBI_RL_EL1_S2_IPA,TLBI_RL_EL2_ALL, TLBI_RL_EL2_VAA

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_inst_data_cfg

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is not 2'b01 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is not 2'b01 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_InD is 2'b01 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_mpamns_value_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: mpamns is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_E or svt_dti_env_configuration :: VERSION_E_b and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0
svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_F and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI2_0

svt_err_check_stats attribute
svt_dti_checker::valid_nsovr_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBuv2 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBuv2 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_non_secure_access is not ONE when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: secure_stream_id is 0 for DTI-TBUv1 or DTI-TBuv2 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

svt_err_check_stats attribute
svt_dti_checker::valid_output_address

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: untranslated is 1 for DTI-ATS protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: untranslated is 1 for DTI-ATS protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is not 0 when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field is not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is not 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is not equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-ATSv2 or DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field is not 0 when svt_dti_transaction :: DTI_ATS_TRANS_RESP.svt_dti_transaction :: untranslated is 1 for DTI-ATS protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_output_address_wrt_oas

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is in range given by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr is within the larger of address sizes svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size and 40bits for DTI-ATSv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is in range given by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr is within the larger of address sizes svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size and 40bits for DTI-ATSv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr is not in range given by svt_dti_transaction :: DTI_TBU_CONDIS_ACK.svt_dti_transaction :: output_address_size for DTI-TBU protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr is not within the larger of address sizes svt_dti_transaction :: DTI_ATS_CONDIS_ACK.svt_dti_transaction :: output_address_size and 40bits for DTI-ATSv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information:

For DTI-TBU protocol, this check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
For DTI-ATS protocol, this check is applicable for all valid svt_dti_env_configuration :: dti_spec_version's when svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI1_0

svt_err_check_stats attribute
svt_dti_checker::valid_output_address_wrt_trans_range

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr for DTI-ATSv2 or DTI-ATSv3 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr for DTI-ATSv2 or DTI-ATSv3 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are not 0 for DTI-TBUv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_TBU_TRANS_RESP.translation_address_range are not equal to svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: addr for DTI-TBUv2 or DTI-TBUv3 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are not 0 for DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: addr field bits within the range given by svt_dti_transaction :: DTI_ATS_TRANS_RESP.translation_address_range are not equal to svt_dti_transaction :: DTI_ATS_TRANS_REQ.svt_dti_transaction :: addr for DTI-ATSv2 or DTI-ATSv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_priv_unpriv_cfg

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is not 2'b01 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is not 2'b01 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: override_PnU is 2'b01 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_state_transition_check

Check grouping: DTI-TBU&DTI-ATS,State_Transition Check description: Checks that

Following valid Channel state transitions are only occurred for DTI-TBU or DTI-ATS protocol
- svt_dti_transaction :: DISCONNECTED to svt_dti_transaction :: REQ_CONNECT
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: CONNECTED
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: DISCONNECTED
- svt_dti_transaction :: CONNECTED to svt_dti_transaction :: REQ_DISCONNECT
- svt_dti_transaction :: REQ_DISCONNECT to svt_dti_transaction :: DISCONNECTED

Pass condition:

One of the following Channel state transitions is occurred for DTI-TBU or DTI-ATS protocol
- svt_dti_transaction :: DISCONNECTED to svt_dti_transaction :: REQ_CONNECT
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: CONNECTED
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: DISCONNECTED
- svt_dti_transaction :: CONNECTED to svt_dti_transaction :: REQ_DISCONNECT
- svt_dti_transaction :: REQ_DISCONNECT to svt_dti_transaction :: DISCONNECTED

Fail condition:

Some other Channel state transition is occurred instead of following valid Channel state transitions for DTI-TBU or DTI-ATS protocol
- svt_dti_transaction :: DISCONNECTED to svt_dti_transaction :: REQ_CONNECT
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: CONNECTED
- svt_dti_transaction :: REQ_CONNECT to svt_dti_transaction :: DISCONNECTED
- svt_dti_transaction :: CONNECTED to svt_dti_transaction :: REQ_DISCONNECT
- svt_dti_transaction :: REQ_DISCONNECT to svt_dti_transaction :: DISCONNECTED

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU&Active DTI_SLAVE_ATS&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_stream_id_check

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: stream_id is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: stream_id is ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: stream_id is not ZERO when Invalidation operation is not using this field for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_substream_id_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: valid_substream is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: flow is ATST for DTI-TBU protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information:

This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version
This check will be performed when svt_dti_transaction :: DTI_TBU_TRANS_REQ.svt_dti_transaction :: ats_translated is 1 for svt_dti_env_configuration :: VERSION_2_0 and svt_dti_env_configuration :: VERSION_3_0

svt_err_check_stats attribute
svt_dti_checker::valid_tbu_dpt_invalidation_operation

Check grouping: DTI-TBU,DTI_TBU_INV_REQ Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: operation is DPTI_RL_PA or DPTI_RL_ALL only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is MG for DTI-TBUv4 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: operation is DPTI_RL_PA or DPTI_RL_ALL only when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is MG for DTI-TBUv4 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_INV_REQ message, svt_dti_transaction :: operation is DPTI_RL_PA or DPTI_RL_ALL when svt_dti_transaction :: DTI_TBU_CONDIS_REQ.svt_dti_transaction :: stages is not MG for DTI-TBUv4 protocol

Applicable device type: Passive DTI_MASTER_TBU&Active DTI_SLAVE_TCU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable only when:

svt_dti_env_configuration :: dti_spec_version is svt_dti_env_configuration :: VERSION_G and svt_dti_port_configuration :: dti_version is svt_dti_port_configuration :: DTI4_0

svt_err_check_stats attribute
svt_dti_checker::valid_translation_attribute

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_REQ message, svt_dti_transaction :: translation_attributes is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_attributes is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_attributes is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_translation_range

Check grouping: DTI-TBU&DTI-ATS,DTI_TBU_TRANS_RESP&DTI_ATS_TRANS_RESP Check description: Checks that

In Translation Response message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x6 when svt_dti_transaction :: bypass is 1 for DTI-TBUv1, DTI-TBUv2 or DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x8 when svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x9 when svt_dti_transaction :: bypass is 0 for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0xB when svt_dti_transaction :: bypass is 0 for DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 0x9, 0xC, 0xD or 0xE for DTI-TBUv3 protocol

Pass condition:

In Translation Response message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x6 when svt_dti_transaction :: bypass is 1 for DTI-TBUv1, DTI-TBUv2 or DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x8 when svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0x9 when svt_dti_transaction :: bypass is 0 for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is with in the range of 0x0 to 0xB when svt_dti_transaction :: bypass is 0 for DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not 0x9, 0xC, 0xD or 0xE for DTI-TBUv3 protocol

Fail condition:

In Translation Response message, svt_dti_transaction :: translation_address_range is not with in the range of 0x0 to 0x6 when svt_dti_transaction :: bypass is 1 for DTI-TBUv1, DTI-TBUv2 or DTI-ATSv1 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not with in the range of 0x0 to 0x8 when svt_dti_transaction :: bypass is 0 for DTI-TBUv1 or DTI-TBUv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not with in the range of 0x0 to 0x9 when svt_dti_transaction :: bypass is 0 for DTI-ATSv1 or DTI-ATSv2 protocol
In the svt_dti_transaction :: DTI_ATS_TRANS_RESP message, svt_dti_transaction :: translation_address_range is not with in the range of 0x0 to 0xB when svt_dti_transaction :: bypass is 0 for DTI-ATSv3 protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: translation_address_range is 0x9, 0xC, 0xD or 0xE for DTI-TBUv3 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Active DTI_MASTER_ATS&Passive DTI_MASTER_ATS&Passive DTI_SLAVE_TCU&Passive DTI_SLAVE_ATS

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

svt_err_check_stats attribute
svt_dti_checker::valid_vmid_check

Check grouping: DTI-TBU,DTI_TBU_TRANS_RESP Check description: Checks that

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Pass condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Fail condition:

In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 1 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: smmu_stream_world is svt_dti_transaction :: EXCEPTION_LEVEL_2 or svt_dti_transaction :: EXCEPTION_LEVEL_3 for DTI-TBU protocol
In the svt_dti_transaction :: DTI_TBU_TRANS_RESP message, svt_dti_transaction :: vmid is not ZERO when svt_dti_transaction :: DTI_TBU_TRANS_RESP.svt_dti_transaction :: bypass is 0 and svt_dti_transaction :: secure_stream_id is 1 for DTI-TBUv1 protocol

Applicable device type: Active DTI_MASTER_TBU&Passive DTI_MASTER_TBU&Passive DTI_SLAVE_TCU

Additional information: This check is applicable for all valid combinations of svt_dti_env_configuration :: dti_spec_version and svt_dti_port_configuration :: dti_version .

VIP Smartsearch

svt_dti_checker Class Reference

Public Member Functions

Public Attributes

Member Function Documentation

Member Attribute Documentation

Public Member Functions
function void	new ( string name, svt_dti_port_configuration cfg, uvm_report_object reporter, bit register_enable = 1, bit enable_pc_cov = 1 )
function void	register_err_checks ( bit en = 1'b1 )
Public Attributes
svt_err_check_stats	allow_non_secure_inst_check
svt_err_check_stats	allow_unpriv_inst_read_check
svt_err_check_stats	allow_unpriv_read_access_check
svt_err_check_stats	allow_unpriv_write_access_check
svt_err_check_stats	ats_condis_sup_t_value_on_connect_check
svt_err_check_stats	ats_cxl_io_value_check
svt_err_check_stats	ats_cxl_value_check
svt_err_check_stats	ats_inv_trusted_entity_bit_value_check
svt_err_check_stats	ats_memory_type_value_check
svt_err_check_stats	ats_page_req_trusted_entity_bit_value_check
svt_err_check_stats	ats_page_resp_trusted_entity_bit_value_check
svt_err_check_stats	ats_pri_msgs_supported_check
svt_err_check_stats	ats_token_translation_value_check
svt_err_check_stats	ats_translation_id_value_check
svt_err_check_stats	ats_translation_scope_check
svt_err_check_stats	ats_trans_resp_te_oa_value_check
svt_err_check_stats	ats_trusted_entity_bit_in_trans_msg_check
svt_err_check_stats	attr_over_nscfg_value_check
svt_err_check_stats	attr_over_rsvd_check
svt_err_check_stats	available_imp_type1_req_for_imp_type1_response_check
svt_err_check_stats	available_imp_type2_req_for_imp_type2_response_check
svt_err_check_stats	available_page_req_ack_check
svt_err_check_stats	available_page_resp_respack_check
svt_err_check_stats	available_reg_req_for_read_response_check
svt_err_check_stats	available_reg_req_for_write_response_check
svt_err_check_stats	bypass_field_check
svt_err_check_stats	check_for_invalidation_token
svt_err_check_stats	check_for_scale_num_tg_ttl
svt_err_check_stats	check_for_translation_token
svt_err_check_stats	check_for_valid_ats_va_ipa_range
svt_err_check_stats	check_for_valid_sid_vmid_range
svt_err_check_stats	check_for_valid_va_ipa
svt_err_check_stats	comb_alloc_attribute_check
svt_err_check_stats	comb_alloc_rsvd_check
svt_err_check_stats	comb_mt_attribute_check
svt_err_check_stats	comb_mt_rsvd_check
svt_err_check_stats	comb_sh_attribute_check
svt_err_check_stats	comb_sh_rsvd_check
svt_err_check_stats	condis_ack_state_check
svt_err_check_stats	contiguous_streamid_check
svt_err_check_stats	data_read_permitted_check
svt_err_check_stats	destructive_read_permitted_check
svt_err_check_stats	destructive_read_permitted_v4_check
svt_err_check_stats	directed_cache_prefetch_check
svt_err_check_stats	directed_cache_prefetch_v4_check
svt_err_check_stats	do_not_cache_field_check
svt_err_check_stats	dti_ats_no_translation_invalidation_token_zero_check
svt_err_check_stats	dti_ats_no_translation_msg_type_check
svt_err_check_stats	dti_ats_no_translation_trl_gnt_token_zero_check
svt_err_check_stats	dti_ats_no_translation_trl_req_token_zero_check
svt_err_check_stats	dti_ats_no_translation_value_check
svt_err_check_stats	dti_ident_one_flow_atst_check
svt_err_check_stats	dti_mmuv_one_nse_ns_in_trans_resp_when_sec_sid_realm
svt_err_check_stats	dti_mmuv_one_nse_ns_in_trans_resp_when_sec_sid_secure
svt_err_check_stats	dti_mmuv_one_sec_sid_non_secure_mpam_check
svt_err_check_stats	dti_mmuv_one_sec_sid_non_secure_trans_req_check
svt_err_check_stats	dti_mmuv_one_sec_sid_non_secure_trans_resp_check
svt_err_check_stats	dti_mmuv_one_sec_sid_realm_mpam_check
svt_err_check_stats	dti_mmuv_one_sec_sid_realm_trans_req_check
svt_err_check_stats	dti_mmuv_one_sec_sid_realm_trans_resp_check
svt_err_check_stats	dti_mmuv_one_sec_sid_secure_mpam_check
svt_err_check_stats	dti_mmuv_one_sec_sid_secure_trans_req_check
svt_err_check_stats	dti_mmuv_one_sec_sid_secure_trans_resp_check
svt_err_check_stats	dti_mmuv_zero_alloc_cfg_rsvd_check
svt_err_check_stats	dti_mmuv_zero_attr_ovr_rsvd_check
svt_err_check_stats	dti_mmuv_zero_bypass_type_value_check
svt_err_check_stats	dti_mmuv_zero_bypass_value_check
svt_err_check_stats	dti_mmuv_zero_fault_response_msg_check
svt_err_check_stats	dti_mmuv_zero_fault_response_type_check
svt_err_check_stats	dti_mmuv_zero_ident_rsvd_check
svt_err_check_stats	dti_mmuv_zero_ind_pnu_rsvd_check
svt_err_check_stats	dti_mmuv_zero_inst_cfg_rsvd_check
svt_err_check_stats	dti_mmuv_zero_nse_ns_value_check
svt_err_check_stats	dti_mmuv_zero_nsx_rsvd_check
svt_err_check_stats	dti_mmuv_zero_partid_pmg_hwattr_check
svt_err_check_stats	dti_mmuv_zero_priv_cfg_rsvd_check
svt_err_check_stats	dti_mmuv_zero_sid_ssid_ssv_sec_sid_flow_rsvd_check
svt_err_check_stats	dti_reqex_zero_permitted_trans_resp_msg_type_check
svt_err_check_stats	dti_tbu_condis_ack_valid_state_check
svt_err_check_stats	dti_tbu_condis_req_valid_state_check
svt_err_check_stats	dti_tbu_imp_msg_type1_msg_type_field_encoding_check
svt_err_check_stats	dti_tbu_imp_msg_type2_msg_type_field_encoding_check
svt_err_check_stats	dti_tbu_trans_req_flow_check
svt_err_check_stats	dti_trans_bp_type_permitted_value_check
svt_err_check_stats	dti_trans_bp_type_reserved_value_check
svt_err_check_stats	dti_trans_ident_output_address_value_check
svt_err_check_stats	dti_trans_mmuv_one_value_check
svt_err_check_stats	dti_trans_mmuv_zero_value_check
svt_err_check_stats	dti_trans_nscfg_use_incoming_when_sec_sid_ns_check
svt_err_check_stats	dti_trans_resp_aset_value_check
svt_err_check_stats	dti_trans_resp_trans_rng_value_v3_check
svt_err_check_stats	dti_trans_respex_mecid_zero_check
svt_err_check_stats	dti_trans_stream_world_el3_v3_check
svt_err_check_stats	instruction_access_check
svt_err_check_stats	instruction_reads_permitted_check
svt_err_check_stats	invalid_msg_in_connected_state
svt_err_check_stats	invalid_msg_in_disconnected_state
svt_err_check_stats	invalid_msg_in_req_connect_state
svt_err_check_stats	invalid_msg_in_req_disconnect_state
svt_err_check_stats	inv_size_check
svt_err_check_stats	inv_substream_id_check
svt_err_check_stats	invalid_sec_sid_for_v3_check
svt_err_check_stats	invalid_trans_range_when_byapss_one
svt_err_check_stats	invalid_trans_range_when_byapss_zero
svt_err_check_stats	invalidation_range_check
svt_err_check_stats	invalidation_range_rsvd_check
svt_err_check_stats	inv_valid_vmid_check
svt_err_check_stats	invalid_fault_type_abort
svt_err_check_stats	invalid_fault_type_global_disabled
svt_err_check_stats	invalid_fault_type_translation_pri
svt_err_check_stats	invalid_fault_type_translation_stall
svt_err_check_stats	memattr_zero_when_mtcfg_zero
svt_err_check_stats	mpamns_rsvd_check
svt_err_check_stats	multiple_ats_inv_reqs_with_same_sid_and_itag
svt_err_check_stats	no_outstanding_inv_req_for_sync_req_check
svt_err_check_stats	no_outstanding_page_req_check
svt_err_check_stats	no_outstanding_page_resp_check
svt_err_check_stats	no_outstanding_reg_req_check
svt_err_check_stats	no_outstanding_sync_req_check
svt_err_check_stats	no_outstanding_trans_req_check
svt_err_check_stats	non_secure_access_check
svt_err_check_stats	ns_in_trans_resp_when_nsovr_zero
svt_err_check_stats	ns_in_trans_resp_when_sec_sid_secure
svt_err_check_stats	num_outstanding_page_req_check
svt_err_check_stats	output_address_size_check
svt_err_check_stats	override_non_secure_access_check
svt_err_check_stats	part_id_rsvd_check
svt_err_check_stats	part_id_rsvd_v3_check
svt_err_check_stats	pending_ats_inv_req_exists_for_inv_comp
svt_err_check_stats	pending_inv_req_exists
svt_err_check_stats	pmg_rsvd_check
logic	previous_reset = 1;
svt_err_check_stats	privileged_access_check
svt_err_check_stats	priv_read_access_check
svt_err_check_stats	priv_write_access_check
svt_err_check_stats	protocol_bit_check
svt_err_check_stats	protocol_version_check
svt_err_check_stats	protocol_version_rsvd_check
svt_err_check_stats	read_write_access_check
svt_err_check_stats	register_access_supported_check
uvm_report_object	reporter
svt_err_check_stats	s1_hw_attribute_check
svt_err_check_stats	s2_hw_attribute_check
svt_err_check_stats	secure_stream_id_check
svt_err_check_stats	smmu_stream_world_and_bypass_check
svt_err_check_stats	strw_is_el1_or_el2_when_sec_sid_one
svt_err_check_stats	strw_is_el1_s2_when_ssv_one
svt_err_check_stats	substream_id_check
svt_err_check_stats	sync_req_exists
svt_err_check_stats	tbi_field_check
svt_err_check_stats	tbu_nscfg_rsvd_when_bp_type_is_dptbypass
svt_err_check_stats	tbu_trans_resp_dptbypass_permitted_check
svt_err_check_stats	tbu_trans_resp_write_permissions_when_dptbypass
svt_err_check_stats	tbu_trans_rng_when_bp_type_is_dptbypass
svt_err_check_stats	tok_trans_gnt_in_connected_state_check
svt_err_check_stats	tok_trans_req_when_disconnect_requested_check
svt_err_check_stats	translation_id_check
svt_err_check_stats	translation_id_value_check
svt_err_check_stats	translation_scope_check
svt_err_check_stats	translation_shareability_check
bit [SVT_DTI_MAX_TRL_TOKEN_WIDTH-1:0]	translation_token_requested = 0;
svt_err_check_stats	valid_asid_attr_over_check
svt_err_check_stats	valid_asid_check
svt_err_check_stats	valid_fault_type
svt_err_check_stats	valid_inc_aset1_field
svt_err_check_stats	valid_inst_data_cfg
svt_err_check_stats	valid_mpamns_value_check
svt_err_check_stats	valid_nsovr_check
svt_err_check_stats	valid_output_address
svt_err_check_stats	valid_output_address_wrt_oas
svt_err_check_stats	valid_output_address_wrt_trans_range
svt_err_check_stats	valid_priv_unpriv_cfg
svt_err_check_stats	valid_state_transition_check
svt_err_check_stats	valid_stream_id_check
svt_err_check_stats	valid_substream_id_check
svt_err_check_stats	valid_tbu_dpt_invalidation_operation
svt_err_check_stats	valid_translation_attribute
svt_err_check_stats	valid_translation_range
svt_err_check_stats	valid_vmid_check